EM TEST PFM 200N100 Power Fail Simulator

Description

EM TEST PFM 200N100 Power Fail Simulators has been designed to fully meet the requirements for E10, E13 and E14 of the LV 124 and the E48-09 of the LV 148. It also allows users to perform micro-interruptions with fast rise/fall time of as low as 200ns as required by GMW 3172, sec. 9.2.18.

The PFM 200N-series includes a switch for the power supply line from 100 mA to 200A and a separate switch in the ground return path. These switches can support very high inrush currents up to several hundreds of Amperes.

 

MODEL SERIES OVERVIEW

PFM 200N-series Automotive Power Fail Simulator for OEM LV 124 and LV 148 and other OEM Standards

Features

  • Switch for Power supply (100 A / 200 A) and signal/data lines (2 A)
  • Pulses E10 and E13 of the LV 124/LV 148 standard
  • Bi-directional current direction
  • Separate switch in the ground line
  • Rise/fall time less than 200ns
  • Built in short-circuit switch <100 mohm
  • Rated voltage ±100 VDC
  • short-circuit-proof
Download Data Sheet
Print
Email

Specifications

GENERAL SWITCH
Switch Impedance Power lines: < 50 mOhm

Data lines: < 500 mOhm

Internal switch Short circuit switch (DC+ to DC-), impedance <100 mOhm)
Internal switch 100 mOhm, per LV 124
Internal switch Low
Internal switch High
POWER LINE SWITCH
Switch 2 Switches in the circuit

– DC+ Power line

– DC- Ground line

DUT voltage ± 100 VDC
DUT current 100 mA to 100 A, 200 A @ 25 °C
Current direction Bi-directional
Switching time < 200 ns (rise/fall time)
Repetition rate 10 μs – 1 h
Drop duration 1 μs – 1 h
Peak current 400 A for 200 ms

1,350 A for 1 ms

automatic switch-off if I > 1,350 A

Safety Short circuit protection
SWITCH FOR SIGNAL- AND DATALINE SWITCH
Channels 16 in depend switched lines
DUT voltage Max. ± 40 VDC
DUT current 100 μA to 2 A, per channel @ 25 °C
Current direction Bi-directional
Switching time < 1 μs (rise/fall time)
Repetition rate 500 μs – 1 h
Drop duration 1 μs – 1 h
Bandwidth 50 MHz / 3 dB
Peak current 5 A for 200 ms
Safety Short circuit protection
Connector PHOENIX, DFMC connector, 1.5 mm2, Push-in-spring cage connection
INTERFACE
Frame bus Control cable to AutoWave
Monitor Output DUT out, differential, BNC plug on front panel

Ratio 1:20

GENERAL DATA
Dimensions 19″/3 HU, 448 mm x 536 mm x 154 mm
Weight approx. 10.5 kg
Supply voltage 100 V – 265 VAC, 50/60 Hz
Fuses 2 x 2 AT
Reference temperature 23 °C ±5 °C
Temperature 10 °C to 35 °C
Humidity 25 % to 75 %, non-condensing
Atmospheric pressure 86 kPa (860 mbar) to 106 kPa (1 060 mbar)
Industries
Stay informed

To keep you in the loop of our latest news, register now for our email newsletter.