Tektronix THS3024 4 Channel 200 MHz Handheld Oscilloscope 5 GSa/s

Description

With 4 isolated channels and up to 7 hours of battery life, the lightweight THS3000 Handheld Oscilloscope Series enables you to safely make floating or differential measurements on your bench or in the field. Now you can tackle tough environments with the performance you expect from Tektronix safely and affordably.

With up to 200 MHz bandwidth, 4 channels, and 5 GS/s maximum sample rate, no other oscilloscope offers as much bandwidth and sample rate in a portable handheld form factor. The THS3000 Handheld Oscilloscope Series has 10,000 points record length per channel, enabling you to capture more signal information at higher sample rates to clearly see signal details. For applications where it is important to measure slow-changing signals over long time periods, the THS3000 Series offers Roll mode that extends the record length to 30,000 points of signal information.

 

Features

  • 100 MHz or 200 MHz Bandwidth Models
  • Maximum Sample Rates up to 5 GS/s and 200 ps Resolution
  • 4 Fully Isolated and Floating Channels
  • 600 VRMS CAT III, 1000 VRMS CAT II Rated Inputs (BNC to Earth Ground)
  • 21 Automatic Measurements
  • Waveform Math and FFT Spectral Analysis
  • Volts, Time, Frequency, Watts Cursor Measurements
  • 6 in. (153 mm) Bright Color Display
  • USB Device and Host Support
  • 7 Hours of Continuous Battery Operation

Tektronix THS3024 Applications

  • Embedded Analog and Digital Design
  • Power Devices, Power Electronics, and Power Supply Design
  • Automotive and Avionics Design and Maintenance
  • Industrial Equipment Design and Installation
  • Field Test and Service
Download Data Sheet
Print
Email

Specifications

Vertical System Analog Channels

Characteristic

THS3014

THS3024

Isolated Input Channels

4

4

Analog Bandwidth (–3 dB)

100 MHz

200 MHz

Rise Time

3.5 ns

1.7 ns

Hardware Bandwidth Limits

20 kHz, 20 MHz, or full

Input Coupling

AC, DC

Input Impedance

1 MΩ ±1%, 14 pF ±2 pF

Input Sensitivity Range

2 mV/div to 100 V/div

Vertical Resolution

8 bits

DC Gain Accuracy

±2.1% of reading +0.04 × range/div for 5 mV/div to 100 V/div

Max BNC Input Voltage

(1 MΩ) 300 VRMS CAT III from BNC signal to BNC shell

Max Probe Voltage (with standard THP0301-X probe)

300 VRMS CAT III from 10:1 probe tip signal to BNC and reference lead

Float Voltage

1000 VRMS CAT II / 600 VRMS CAT III from BNC shell to earth ground

Trace Positioning

±4 divisions

Horizontal System

Characteristic

THS3014

THS3024

Maximum Sample Rate

2.5 GS/s (1.25 GS/s 4-ch)

5 GS/s (1.25 GS/s 4-ch)

Maximum Record Length (All channels)

10,000 points (30,000 points in Roll mode (4 ms to 2 min / div))

Time-base Range (s/div)

2 ns to 4 s

1 ns to 4 s

Delay Time Range

1 full screen (12 divisions) of pre-trigger or up to 100 screens (1,200 divisions) of post-trigger

Timing Accuracy

±100 ppm + 0.04 div

Zoom

Horizontally expand or compress a live or stopped waveform

       

Trigger System

Characteristic

Description

Input Source

Channel 1, 2, 3, or 4. All input references isolated from each other and earth ground

Main Trigger Modes

Auto-level, Auto, Normal, and Single

Trigger Coupling

DC, HF Reject, Noise Reject (reduces sensitivity)

Trigger Sensitivity

Characteristic

Description

Internal DC Coupled

0.5 divisions from DC to 5 MHz at >5 mV/div

1 divisions >5 MHz to 200 MHz (THS3024)

1 divisions >5 MHz to 100 MHz (THS3014)

Trigger Level Range

Characteristic

Description

Any Channel

±4.0 divisions

Trigger Modes

Mode

Description

Edge

Positive, negative, or dual slope on any input channel. Coupling includes DC, HF Reject, and Noise Reject

Pulse Width

Trigger on Channel 1, width of positive or negative pulses (glitches) that are >, <, =, or ≠ a specified period of time (resolution of 0.01 div with minimum time of 50 ns)

Event

Trigger on N-th occurrence of trigger (N selectable from 2 to 99)

Video

Trigger on Channel 1, line number, all lines, odd, even, or all fields on NTSC, PAL, PAL Plus, and SECAM signals

Non-interlaced

Trigger on Channel 1, high-res non-interlaced video with line frequencies from 14 kHz to 65 kHz

Acquisition Modes

Mode

Description

Sample (Default)

Acquire sampled values

Glitch Detect

Captures high frequency or glitches as narrow as 8 ns from 5 μs to 120 s / div

Averaging

Selectable from 2, 4, 8, or 64 waveforms

Roll

Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 4 ms/div

Data Recorder

Automatic data logging of 100 triggered records (screens) with date and time stamp. Store internally or to a USB device

Waveform Compare

Visually compare against user-definable reference waveforms or perform automatic Pass or Fail testing of 1 to 4 channels with data logging of test results

Automatic Setup

Mode

Description

Autoset

Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems

Autorange

Continuous auto-setup of vertical, horizontal, and trigger systems that track signal changes

Waveform Measurements

Characteristic

Description

Cursors

Time, Freq (1/T), Volts, Watts, Rise/Fall Time from any input channel or math waveform

Automatic Measurements

21. Up to 4 can be displayed on-screen at any one time. Measurements include:

V DC, V ACRMS, V AC+DC, VPeak Max, VPeak Min, Peak to Peak, A DC, A AC, A AC+DC, Frequency, Rise Time (using cursors), Fall Time (using cursors), Phase (between any 2 inputs), Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, dBV, dBm into 50 Ω and 600 Ω

TrendPlot™

Records and graphically displays any 4 automatic scope measurements. Store internally or to USB flash drive for recall and analysis

Waveform Math

Characteristic

Description

Arithmetic

Add, subtract, and multiply waveforms

FFT

Spectral magnitude. Set FFT Vertical Scale to Linear or Logarithmic, and FFT Window to Automatic, Hamming, Hanning, or None

Display Characteristics

Characteristic

Description

Display Type

6 in. (153 mm) Liquid-crystal Color Display

Display Resolution

320 horizontal × 240 vertical pixels

Waveform Style

Vectors (dot-join), Dots, Envelope, Variable Persistence, Infinite Persistence

Display Format

YT and XY

Storage Memory

Characteristic

Description

Reference

4 user-definable reference traces

Waveform

Stores 30 internal scope records (4 traces each) with screen image and corresponding setup

Recording

Store 10 internal recordings that can be a 100-screen replay sequence, a Roll-mode recording, or a TrendPlot™ measurement recording

Screen Image

Store up to 9 internally or 256 BMP images to an external USB storage drive

Real-time Clock

Time and date stamp of all stored data

Stay informed

To keep you in the loop of our latest news, register now for our email newsletter.