Teseq CFL 9206 Transient Limiter
Description
Teseq CFL 9206 Transient Limiter has been designed to interface between a transducer (antenna, line network) and measuring equipment (receiver, spectrum analyzer). The CFL 9206 assists in preventing damage to input circuits of measuring equipment from high level transients often encountered during conducted emission testing. The CFL 9206 incorporates a band pass filter and a 10 dB high power attenuator. The maximum input power ratings are for signals within the CFL 9206 passband.
Features
- Helps to protect spectrum and measuring receivers from damage
- Filters very low frequencies <9 kHz
- 10 dB Attenuator
Download Data Sheet
Print
Email
Specifications
| Insertion loss | 10 dB ±0.5 dB |
| Frequency response | 9 kHz to 30 MHz |
| Maximum continuous input | 36 dBm at 25°C (for signal within the passband) |
| Input temperature de-rating linear | 30 dBm at 50°C |
| Maximum DC voltage on | 400 Volts |
| Input (1 second) | 42 dBm |
| Peak power (non-repetitive <10 μs) | 4 kW |
| Maximum output power (for +42 dBm input) | 15 dBm |
| Maximum input level (no compression) | 15 dBm |
| 50 Hz rejection | 100 dB |
| System impedance | 50 Ω |
| Connectors | BNC |
| Operating temperature | 0 to 50°C |
| Size (W x D x H) | 140 mm x 70 mm x 25 mm |
| Weight | approx. 185 g |
