Teseq CBA 6G-100 Broadband Amplifier 1.8 GHz – 6 GHz 100W

Description

Teseq CBA 6G-100 Broadband Amplifier 1.8 GHz – 6 GHz 100W Designed specifically for Radiated EMC testing, this mismatch tolerant amplifier delivers power continuously into the poor and variable match typically associated with testing above 1 GHz.

Although antenna gain is relatively constant, increasing cable losses at the higher frequencies demand increasing power with increasing frequency. Teseq amplifiers are therefore designed to maintain their high linear output power right up to and beyond the defined frequency range.

The unit is powered from a switched mode power supply for high efficiency, high power factor and wide voltage range operation. The unit is air-cooled with integral fans and is protected against faulty cooling by excess temperature sensing. A safety interlock connector is provided, which the user can short circuit to ground, to put the amplifier into standby mode. Front panel indicators are provided to indicate over-temperature and rf interlock operation.

Features

  • High reliability gallium nitride technology
  • Mismatch tolerant and unconditionally stable
  • Wide instantaneous bandwidth
Download Data Sheet
Print
Email

Specifications

Parameter Value
Frequency range (instantaneous) 1800 to 6000 MHz
Rated output power 130 W minimum
140 W typical
Output power at 1 dB gain compression 100 W minimum
120 W typical
Gain 50 dB
Third order intercept point 57 dBm
Stay informed

To keep you in the loop of our latest news, register now for our email newsletter.