Temptronic ATS-505 Thermostream -20° to +225°C
Description
Advanced Temperature Source for fast and precise thermal conditioning of components, parts, hybrids, modules, sub-assemblies, and printed circuit boards. Capable of ultra-low temperatures without the use of Liquid Nitrogen (LN2) or Liquid Carbon Dioxide (LCO2).
Features
- System Airflow Output: 4 to 10 scfm ( 1.9 to 4.7 l/s)
- Temperature Display & Resolution: ±1°C
- Temperature Accuracy: ±1°C
- Directly Control the device under test (DUT
- DUT Control Sensors: Type T or Type K Thermocouples
- Remote interfaces: IEEE.488, RS232
- Thermal Cap provides a localized thermal test environment, protecting from moisture condensation at the DUT site.
- Handheld thermal wand for flexibility in bringing temperature to device; optional bench stand for hands-free operation
- Compact, portable system fits benchtop
- CE Compliant and CFC-free
Specifications
|
Facility Requirements |
||
|
Power |
200 – 250 VAC (230V nominal), 50/60Hz 10 amp, 1phase |
|
|
Compressed Air |
||
|
Clean, Dry Air (CDA) |
Filtered to 5 micron particulate contamination. Oil Content: <0.1 ppm, by weight, filtered to 0.01 micron oil contaminant. Dew point: ambient to -40°C |
|
|
Air Supply Pressure |
5.6 to 7kg /cm2 (80 to 90 PSIG) 5.6 kg/cm (90 PSIG) nominal |
|
|
Total Air Flow Rate Required |
4 to 5 l/s (8-10 scfm) 4.5 l/s (9 scfm) nominal |
|
|
Air Supply Temperature |
+20° to +28°C; +23°C nominal |
|
|
Operating Environment |
||
|
Operating Temperature |
+20° to +28°C; +23°C nominal |
|
|
Humidity |
0 to 60%; 45% nominal |
|
|
Service and Safety |
||
|
Refrigerants |
HCFC and CFC-free, non-toxic, non-flammable |
|
|
Serviceability |
Auto-diagnostics and field replaceable modules |
|
|
Over Temperature Protection |
+230°C (factory set): Operator can set high and low air temperature limits |
|
|
Weight and Dimensions |
||
|
Dimensions |
Controller |
40.1cm (15.8 inches) WIDE x 14.8cm (5.8 inches) HIGH x 48.9cm (19.2 inches) DEEP |
|
Thermal Wand |
8cm (3 inches) DIAMETER, 36cm (14 inches) LONG |
|
|
Stand |
48.25cm (19 inches) approximately above benchtop to top of post |
|
|
Reach from Vertical Post |
standard, 51cm (20 inches) |
|
|
Weight |
Controller with Thermal Wand and Hose: 14.5 kg (32lbs.) Thermal Wand Stand Assembly: 7kg (5.5 lbs.) Thermal Cap: .45 kg (1lb.) |
|
|
Noise Level |
<70dBA |
|
