Sorensen DLM 8-75 Programmable DC Power Supply 8V 75A 600W

Description

Sorensen DLM 8-75 Programmable DC Power Supply 8V 75A 600W is designed to provide continuously variable output voltage and current for a broad range of applications in a compact 1U (1.75 inches) high, half-rack (8.5 inch) wide chassis.

With the use of Zero Voltage Switching (ZVS) technology, these supplies are able to achieve exceptionally low, near-linear ripple and noise rivaling larger and more expensive linear power supplies. In addition, the high efficiency and fast load transient response assure that the DLM is ideal for even the most demanding applications.

The Sorensen DLM 600W models are ideal for high density multiple output rackmount requirements or low profile benchtop applications. Output voltages from 0-5VDC to 0-300VDC and currents from 0-2A to 0- 75A are available.

The cooling air intake is at the front and sides with exhaust at the rear and sides. Variable speed fans are controlled as a function of ambient air temperature and load, thus reducing acoustic noise and increasing fan life. This allows supplies to be stacked one directly on top of another without space in between, yielding maximum rackmount packing density and a wide operating temperature of 0-50° C. An optional rackmount kit is available to easily mount one or two units side-by-side.

The front panel layout makes the Sorensen DLM 600W series easy to use. Voltage and current can be set from individual 10-turn potentiometer knobs. Control push buttons include power on, output on, local/remote, voltage/ current preview and overvoltage protection preview. Set-point or actual voltage/ current values can be viewed on two 3-½ digit LED displays. The DLM 600W can also be controlled through IEEE488.2 GPIB (option) or LXI-compliant Ethernet (option).

Supplies can be connected in series or parallel. All models automatically accept any standard single phase input without manual set up.

Features

  • High Power Density: 600 watts in 1U (1.75 inches) high, half rack (8.5 inches) wide; no top or bottom clearance spacing required.
  • Near Linear Ripple & Noise Ripple as low as 2.5mV rms, noise as low as 15mV p-p.
  • Remote Control
  • LXI Compliant Ethernet LAN / RS-232C (16 bit)
  • IEEE-488.2 / RS-232C (12 bit)
  • Standard analog programming 0-5V, 0-10V, or 0-5kΩ
Download Data Sheet
Print
Email

Specifications

Common
Remote Sense The maximum load line drop is up to the full voltage rating of the supply. The drop in the load leads subtracts from the maximum voltage available for the load except as follows: maximum rated voltage is available at the load and voltage regulation specifications apply for line drops of<1V on DLM5-75 and DLM8-75, <2V for all other DLM600 models and DLM3K/4K models rated 5V to 16V, and <5V for all other DLM3K/4K models.
Remote Programming Voltage, current (0-100%) and OVP (5-110%) of full scale can be programmed by selectable 0-5VDC, 0-10VDC, or 0-5kΩ
Remote Monitoring Voltage or current can be monitored with userselectable ranges, scaled to 0-5 VDC or 0-10 VDC
Operational Features Master/slave parallel operation, up to 4 units of the same model can be connected in parallel, with active current sharing control. Series operation, multiple units of the same model can be connected in series, limited by 300Vpk between both output terminal and chassis.
Software IVI-COM, LabVIEW® or LabWindow®/CVI driver for ethernet and IEEE-488.2
Regulatory Compliance CE Compliant:
• Low Voltage Directive (73/23/EEC) using EN 61010-1, and
• EMC Directive (89/336/EEC) using EN 61326 Certified to UL 61010-1, CSA C22.2 No. 61010.1 and IEC/EN 61010-1
Input
Voltage and Frequency 90-132 VAC or 180-264 VAC max, auto ranging,
47-63 Hz, single phase, 2-wire plus ground
Current 11A maximum at 115VAC, 6A maximum at 230 VAC
Connector IEC 320 with detachable line cord
Power Factor 0.6, typical at full load; dependent on the impedance of the AC input.
Output
Line Regulation Voltage: 0.005% of V max + 2 mV
Current: 0.01% of I max + 2 mA
See table for input voltage variation over the AC input voltage range, with constant rated load.
Load Regulation Voltage: 0.005% of V max + 2 mV
Current: 0.02% of I max + 5 mA
See table For 0-100% load variation, with constant nominal line voltage
Transient Response 500 μs to steady-state output voltage (within 0.1% of Vmax) for 50-100% or 100-50% load change
Stability ±0.05% of maximum voltage or current over 8 hours after 30 minute warm-up time at fixed line, load and temperature
Efficiency 84% typical at maximum output power; 82% typical for DLM 5-75 and DLM 8-75
Temperature Coefficient 0.02%/°C of maximum output voltage, 0.03%/°C of maximum output current. Change in output per °C change in ambient temperature, with constant line and load.
Physical
Dimensions Width: 8.5” (216 mm)
Height: 1U or 1.75” (44 mm)
Depth: 17” (432 mm) Option M6 depth 20” (508 mm)
Weight & Shipping
Weight 9.7 lbs. (4.4 kg)
Shipping Weight 12.7 lbs. (5.8 kg)
Output Ratings
Model

Voltage

Current

Power

DLM 5-75

0-5 VDC

0-75 ADC

375 W

DLM 8-75

0-8 VDC

0-75 ADC

600 W

DLM 10-60

0-10 VDC

0-60 ADC

600 W

DLM 20-30

0-20 VDC

0-30 ADC

600 W

DLM 40-15

0-40 VDC

0-15 ADC

600 W

DLM 60-10

0-60 VDC

0-10 ADC

600 W

DLM 80-7.5

0-80 VDC

0-7.5 ADC

600 W

DLM 150-4

0-150 VDC

0-4 ADC

600 W

DLM 300-2

0-300 VDC

0-2 ADC

600 W

Model

Line Regulation

Load Regulation

Voltage (0.005% of Vmax + 2 mV)

Current (0.01% of Imax + 2 mA)

Voltage (0.005% of Vmax + 2 mV)

Current (0.02% of Imax + 5 mA)

DLM 5-75

2.4 mV

9.5 mA

2.4 mV

20 mA

DLM 8-75

2.4 mV

9.5 mA

2.4 mV

20 mA

DLM 10-60

2.5 mV

8 mA

2.5 mV

17 mA

DLM 20-30

3 mV

5 mA

3 mV

11 mA

DLM 40-15

4 mV

3.5 mA

4 mV

8 mA

DLM 60-10

5 mV

3 mA

5 mV

7 mA

DLM 80-7.5

6 mV

2.8 mA

6 mV

6.5 mA

DLM 150-4

9.5 mV

2.2 mA

9.5 mV

5.8 mA

DLM 300-2

17 mV

2.1 mA

17 mV

5.4 mA

Output Ratings

GPIB (M9G/M85)

Model

Voltage (0.2% of VMax)

Current (0.5% of IMax)

OVP (1% of 1.1 x VMax)

DLM 5-75

16 mV

375 mA

55 mV

DLM 8-75

16 mV

375 mA

88 mV

DLM 10-60

20 mV

300 mA

110 mV

DLM 20-30

40 mV

150 mA

220 mV

DLM 40-15

80 mV

75 mA

440 mV

DLM 60-10

120 mV

50 mA

660 mV

DLM 80-7.5

160 mV

38 mA

880 mV

DLM 150-4

300 mV

20 mA

1.65 mV

DLM 300-2

600 mV

10 mA

3.3 V

Programming Accuracy

Ethernet (M130/M131)

Model

Voltage (0.1% of VMax)

Current (0.25% of IMax)

OVP (0.5% of 1.1 x VMax)

DLM 5-75

8 mV

188 mA

44 mV

DLM 8-75

8 mV

188 mA

44 mV

DLM 10-60

10 mV

150 mA

55 mV

DLM 20-30

20 mV

75 mA

110 mV

DLM 40-15

40 mV

38 mA

220 mV

DLM 60-10

60 mV

25 mA

330 mV

DLM 80-7.5

80 mV

19 mA

440 mV

DLM 150-4

150 mV

10 mA

825 mV

DLM 300-2

300 mV

5 mA

1.65 V

Programming Accuracy

Ethernet (M130/M131)

Model

Voltage (0.1% of VMax)

Current (0.25% of IMax)

OVP (0.5% of 1.1 x VMax)

DLM 5-75

8 mV

188 mA

44 mV

DLM 8-75

8 mV

188 mA

44 mV

DLM 10-60

10 mV

150 mA

55 mV

DLM 20-30

20 mV

75 mA

110 mV

DLM 40-15

40 mV

38 mA

220 mV

DLM 60-10

60 mV

25 mA

330 mV

DLM 80-7.5

80 mV

19 mA

440 mV

DLM 150-4

150 mV

10 mA

825 mV

DLM 300-2

300 mV

5 mA

1.65 V

Programming Accuracy

GPIB

Model

Voltage (0.1% of VMax)

Current (0.25% of IMax)

OVP (0.5% of 1.1 x VMax)

DLM 5-75

16 mV

375 mA

55 mV

DLM 8-75

16 mV

375 mA

88 mV

DLM 10-60

20 mV

300 mA

110 mV

DLM 20-30

40 mV

150 mA

220 mV

DLM 40-15

80 mV

75 mA

440 mV

DLM 60-10

120 mV

50 mA

660 mV

DLM 80-7.5

160 mV

38 mA

880 mV

DLM 150-4

300 mV

20 mA

1.65 V

DLM 300-2

600 mV

10 mA

3.3 V

Display Accuracy
Model

Voltage

Current

DLM 5-75

35 mV

850 mA

DLM 8-75

50 mV

850 mA

DLM 10-60

60 mV

700 mA

DLM 20-30

200 mV

400 mA

DLM 40-15

300 mV

160 mA

DLM 60-10

400 mV

110 mA

DLM 80-7.5

500 mV

85 mA

DLM 150-4

850 mV

50 mA

DLM 300-2

2.5 V

30 mA

Ripple and Noise
Model

Ripple and Noise, Voltage Mode

OVP Adjustment Range
(5% – 110% of Vmax)

Ripple (RMS)*

Noise (P-P)*

DLM 5-75

5 mV

30 mV

0.25 – 5.5 V

DLM 8-75

5 mV

30 mV

0.4 – 8.8 V

DLM 10-60

5 mV

30 mV

0.5 – 11 V

DLM 20-30

2.5 mV

15 mV

1 – 22 V

DLM 40-15

2.5 mV

15 mV

2 – 44 V

DLM 60-10

2.5 mV

20 mV

3 – 66 V

DLM 80-7.5

4 mV

20 mV

4 – 88 V

DLM 150-4

7 mV

40 mV

7.5 – 165 V

DLM 300-2

10 mV

60 mV

15 – 330 V

Ripple and Noise: Stability
Model

Voltage (0.05% of VMax)

Current (0.05% of IMax)

DLM 5-75

2.5 mV

37.5 mA

DLM 8-75

4 mV

37.5 mA

DLM 10-60

5 mV

30 mA

DLM 20-30

10 mV

15 mA

DLM 40-15

20 mV

7.5 mA

DLM 60-10

30 mV

5 mA

DLM 80-7.5

40 mV

3.75 mA

DLM 150-4

75 mV

2 mA

DLM 300-2

150 mV

1 mA

Ripple and Noise
Model

Traffic Coefficient

Maximum Total Remote
Sense Drop

Voltage (0.02% /°C of Vmax)

Current (0.03% / °C of Imax)

DLM 5-75

1 mV / °C

22.5 mA / °C

1 V

DLM 8-75

1.6 mV / °C

22.5 mA / °C

1 V

DLM 10-60

2 mV / °C

18 mA / °C

2 V

DLM 20-30

4 mV / °C

9 mA / °C

2 V

DLM 40-15

8 mV / °C

4.5 mA / °C

2 V

DLM 60-10

12 mV / °C

3 mA / °C

2 V

DLM 80-7.5

16 mV / °C

2.25 mA / °C

2 V

DLM 150-4

30 mV / °C

1.2 mA / °C

2 V

DLM 300-2

60 mV / °C

0.6 mA / °C

2 V

Stay informed

To keep you in the loop of our latest news, register now for our email newsletter.