Teseq NSG 1007-5-400 Single Phase Power Source 5kVA
Description
Teseq NSG 1007-5-400 Single Phase Power Source 5kVA is highly efficient, lightweight AC and DC power source which includes a high-performance power analyzer.
With precise output regulation and accuracy, these sources address many application areas for AC and DC power testing. They provide a high load current capability, multi or single-phase output mode, and built-in power analyzer measurements.
Additional features including line distortion simulation (LDS), arbitrary waveform generation, and programmable output impedance address requirements for product quality and regulatory compliance testing.
Note: 5 kVA AC Source (208 V) L-L three phase input, single phase output.
Features
- 5 kVA Combination AC and DC power source and power analyzer
- Arbitrary waveform generation
- Built-in digital power analyzer
- Meets source requirements for IEC 61000-3-2 and -3-3
Download Data Sheet
Print
Email
Specifications
Parameter | Value |
Operating modes | AC, DC, or AC and DC |
Frequency range | 16 – 1000 Hz (See voltage de-rating vs. frequency chart below) |
Total power | 5.000 VA |
Load power factor | 0–1 at full rated power |
Output noise | (20 kHz to 1 MHz) <250 mVrms typical, <500 mVrms max. |
Harmonic distortion | <1% from 16-66 Hz, <2% at 400 Hz, <3% at 800 Hz |
DC offset | <20 mV |
External amplitude modulation | Depth 0-10%, Frequency DC-2 kHz |
Isolation voltage | 300 Vrms output to chassis |