Teseq Profline 2130 Three Phase Harmonics & Flicker System 30kVA
Description
Teseq Profline 2130 Three Phase Harmonics & Flicker System 30kVA is an accurate and flexible three phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3. This system can also be used to test to IEC 61000-3-11 and IEC 61000-3-12 on products consuming up to 37 A per phase @ 230 VAC.
The system is supplied complete with a stable, accurate, programmable 10 kVA per phase power source. The ProfLine 2130 system is therefore ready to measure and record any harmonics & flicker created by the EUT.
Features
- Complete test system
- IEC 61000-3-2, -3-3, -3-11 and -3-12
- Three phase system up to 43 A per phase
- Power source suitable for testing to many immunity standards
01
02
03
04
05 Download Data Sheet
Print
Email
Specifications
| Mains supply options | ProfLine 2130-208 | ProfLine 2130-400 |
| System contents | NSG 1007-30-208 Power source | NSG 1007-30-400 Power source |
| CCN 1000-3 3-phase | CCN 1000-3 3-phase | |
| Coupling unit | Coupling unit | |
| DAQ card | DAQ card | |
| Interface cable | Interface cable | |
| WIN 2100 H&F test software | WIN 2100 H&F test software | |
| WIN 2106 PQT test software >16A | WIN 2110 PQT test software >16A | |
| WIN 2145 PQT test software | WIN 2145 PQT test software | |
| Pre-configured PC | Pre-configured PC | |
| USB cable | USB cable | |
| Power source (for full specification see separate datasheet) | ||
| Power output (AC mode) | 3 x 10,000 VA | 3 x 10,000 VA |
| Voltage AC, two ranges | 0-150 V and 0-300 V | 0-150 V and 0-300 V |
| Rated current @150 V
(low range) |
66.6 Amps/phase, 240 Amps
peak repetitive |
66.6 Amps/phase, 240 Amps
peak repetitive |
| Maximum current @120 V
[power graph – see datasheet] |
85 Amps/phase
300 Amps peak repetitive |
85 Amps/phase
300 Amps peak repetitive |
| Frequency range (AC mode) | 16 – 819 Hz | 16 – 819 Hz |
| Power output (DC mode) | 6,667 watts/phase | 6,667 watts/phase |
| Voltage DC, two ranges | 0-200 V and 0-400 V | 0-200 V and 0-400 V |
| Maximum current (low range) | 33.3 Amps | 33.3 Amps |
| Maximum current (high range) | 16.6 Amps | 16.6 Amps |
| Supply | 3-Phase
208 Vac L-L 50/60Hz |
3-Phase
400 Vac L-L 50/60Hz |
| Dimensions (per chassis) | 1270 x 731x 876 mm | 1270 x 731x 876 mm |
| Weight (per chassis) | 522 kg | 522 kg |
| Coupling unit | ||
| Number of phases | 3 | 3 |
| Measurement channels | 12 | 12 |
| EUT connector: Rear panel | Terminal block | Terminal block |
| Maximum voltage | 300 Vac | 300 Vac |
| Maximum current | 74 Arms (200 A Pk for 10 ms) | 74 Arms (200 A Pk for 10 ms) |
| Supply power: Voltage | 115/230 Vac +/- 10% | 115/230 Vac +/- 10% |
| Supply power: Current | <0.5 A | <0.5 A |
| Supply power: Frequency | 50/60 Hz | 50/60 Hz |
| Dimensions (HxWxD) | 89 x 427 x 560 mm | 89 x 427 x 560 mm |
| Weight | 5 kg | 5 kg |
