EM TEST MPG 200S20 Automotive Micropulse Generator
Description
EM TEST MPG 200S20 Automotive Micropulse Generator has a built-in battery switch to interrupt the DC supply voltage as required by the standards. It is designed to generate pulses 1b and 6 as per GOST 28751-90 as well as pulse 6 as per ISO 7637-1:1990.
The MPG 200S20 includes everything necessary to conduct fully compliant tests. The built-in electronic battery switch enables interruption of the DC supply voltage as required by the standards. The MPG 200S20 is a standalone tester including a 60V/25A DC coupling/decoupling network but still it can be integrated easily into a complete test system.
Features
- Standalone test generator
- Test Voltage up to 1,100V
- Includes 30, 50, 100, 150 and 200ohm source impedance
- Built-in electronic battery switch
- Built-in CDN 60V/25A DC
- Front panel operation
- Standard Test routines
- USB and GPIB interfaces
Download Data Sheet
Print
Email
Specifications
| TECHNICAL DETAILS | |
| PULSE SPECIFICATIONS | |
| Voltage (o.c.) | U = 50V – 1,100V ± 10% |
| Int. resistor | selectable 30ohm, 50ohm, 100ohm, 150ohm, 200ohm
other values: by external plug-in module |
| Polarity | Positive/negative |
| GOST PULSE 1B (24V) | |
| Voltage (o.c.) | 50V – 1,100V |
| Rise time | 9us +0%/- 50% (10 – 90%) |
| Pulse duration | 1ms ± 10% (10 – 10%) |
| Int. resistor | 50ohm ± 10% |
| ISO PULSE 6 (12V/24V) | |
| Voltage (o.c.) | 25V – 400V |
| Rise time | 60us +0%/-50% (10 – 90%) |
| Pulse duration | 300us ± 10% (10 – 10%) |
| Int. resistor | 30ohm ± 10% |
| TRIGGER | |
| Automatic | Automatic release of the pulses |
| Repetition rate | 0.2s – 99.0s |
| Manual | Manual release of a single pulse |
| External | External release of a single pulse |
| Supply switch | Off time, selectable; 0 – 10,000ms |
| OUTPUT | |
| DUT supply +/- | Safety laboratory connectors |
| Coupling | To the battery +line |
| Decoupling | Via diode and battery supply switch |
| DUT supply | Max. 60V/25A |
| TEST ROUTINES | |
| Quick Start | Immediate start; easy-to-use and fast |
| User Test routines | Change voltage after n pulses |
| Service | Service, setup, self-test |
| INTERFACE | |
| Serial interface | RS 232, baud rate 1,200 – 19,200 |
| Parallel interface | IEEE 488, address 1 – 30 |
| CN interface | To control external coupling network |
| GENERAL DATA | |
| Dimensions, weight | 19″/6HU, approx. 20kg |
| Supply voltage | 115/230V +10/-15% |
| Fuses | 2 x T 1AT |
