EM TEST VSS 500N12 Voltage Surge Simulator
Description
VSS 500N12 – 12kV Voltage Surge Simulator for voltage withstand testing as per IEC 61180-1, IEC 61180-2 and IEC 60664
EM TEST VSS 500N12 Voltage Surge Simulator generates high voltage transients as required by several IEC standards. The voltage surge pulses are used to test the isolation (voltage withstand) capability of components, sockets, connectors, cables and many other items.
Spark over detection and voltage/current measuring functions are included in the generator.
Testing the voltage withstand capability by means of a transient test pulse is the most common alternative to tests using A.C. or D.C. voltages.
MODEL SERIES OVERVIEW
VSS 500N12-series 12 kV Pulse generator for voltage withstand testing per IEC standards
Features
- Surge voltage up to 12kV
- Wave form 1.2/50µs
- Built-in source impedance
- Interlock
- Warning lamp control
- Voltage/current measurement
- Spark-over detection
- Manual operation
- USB (optical link) and GPIB interface
01
02 Download Data Sheet
Print
Email
Specifications
| TECHNICAL SPECIFICATIONS | |
| VOLTAGE SURGE SIMULATOR, PULSE 1.2/50µs | |
| Voltage (o.c.) | 500V – 12,000V ± 10% |
| Pulse front time | 1.2µs ± 30% |
| Pulse time to half | value 50µs ± 20% |
| Current (s.c.) | Max. 24A ± 10% |
| Int. resistor | 500 ohm ± 10 % |
| Polarity | Positive/negative/alternating |
| Event counter | 1 – 30,000 or endless |
| TRIGGER | |
| Automatic | Automatic pulse release |
| Manual | Single pulse release |
| External | External pulse release |
| CRO trigger | 5V trigger signal for oscilloscope |
| Synchronization | 0° – 360°, resolution 1° |
| Repetition rate | Max. 1Hz (1s – 999s) |
| OUTPUT | |
| Direct | Via HV connector; Zi = 500ohm or as per selected model(40 ohm or 50 ohm) |
| INTERFACE | |
| Optical interface | Opto link, 3m cable
USB A connector |
| Parallel interface | IEEE 488, addresses 1 – 30 |
| GENERAL DATA | |
| Dimensions | 19″/3HU |
| Weight | approx. 15kg |
| Supply voltage | 115/230V +10/-15% |
| Fuses | 2 x 2 AT (230V) or 2 x 4 AT (115V) |
