Kaelus CIS-0001A Passive Intermodulation (PIM) Source
Description
Passive Intermodulation (PIM) Source * the Nominal PIM level for the PIM Source can vary within the range shown. The Nominal PIM level will be repeatable within ± 3dB for subsequent PIM measurements within the same frequency band.
Features
- Passive Intermodulation (PIM) test source
- Repeatable high PIM level over wide frequency range
- Used to verify PIM test equipment operation
- Used to calibrate Range to Fault module for PIM testing
- Rugged shock proof design
- Heat shield for personal protection
- Dust cover for prolonged life
Specifications
|
Frequency Range |
500MHz – 2300MHz |
|
RF impedance |
50 ohms |
|
Return loss |
18dB min |
|
Nominal PIM level* |
As per graph |
|
RF power rating |
10W, continuous | 50W, 3 mins |
|
Connector |
7/16 Male |
|
Mating torque |
Install slightly more than hand tight to the RF output port of the PIM Analyzer. Tightening with a 7/16 DIN torque wrench is not recommended. |
|
Operating temperature range |
-10° to +50° C |
|
Dimensions (L x D) |
190 x 60mm (7.48 x 2.36in) |
|
Weight |
0.5kg (1.0lb) |
*The Nominal PIM level for the CIS-0001A can vary within the range shown. The Nominal PIM level will be repeatable within ± 3dB for subsequent PIM measurements at a specific frequency.
