Kaelus PIL-0001A Low Passive Intermodulation (PIM) Load
Description
Low Passive Intermodulation (PIM) Load: The Kaelus Low PIM Load absorbs high level RF signals and will become hot during normal operation.
Features
- Low Passive Intermodulation (PIM)
- Consistent PIM level over wide frequency range
- Used for accurate PIM measurement
- Rugged shock proof design
- Heat shield for personal protection
- Dust cover for prolonged life
- Rear coupling ring for lanyard attachment
Specifications
|
Frequency Range |
500MHz – 2300MHz |
|
RF impedance |
50ohms |
|
Return loss |
500 – 1100MHz 12dB min |
|
1100 – 1500MHz 16dB min |
|
|
1500 – 2300MHz 15dB min |
|
|
Passive intermodulation |
< -107dBm (2 x 43dBm carriers) – typically < -115dBm |
|
RF power rating |
10W, continuous | 40W, 3 mins (with 1:4 on / off ratio) |
|
Connector |
7/16 Female |
|
Mating torque |
25 Nm with wrench supporting connector flange |
|
Operating temperature range |
-10° to +50° C |
|
Dimensions (L x D) |
190 x 60mm (7.48 x 2.36in) |
|
Weight |
0.6kg (1.3lb) |
Note: The Kaelus PIL-0001A absorbs high level RF signals and will become hot during normal operation. The PIL-0001A will fail and the warranty will be void if operated beyond the RF Power Rating and times listed above. The RF power rating of the load for continuous use is 10W. Intermittent use up to 40W is permissible assuming the maximum on time is < 3 minutes. Cool down time must exceed RF on time by four times!
