AWT Global PIM Analyzers – Single Band
Description
AWT’s PIM Analyzers are ideal for production and laboratory. These instruments are very accurate, yet highly reliable and built for true continuous 24/7 operation. The complete system consists only of one unit, making set-up easy and operation convenient.
With the introduction of new wireless technologies like LTE, and LTE-A, network operators demand RF components that offer excellent PIM characteristics. AWT’s PIM Analyzers are well suited for this task. With -172dBc sensitivity, our analyzers detect all PIM issues of tested RF components. Engineers appreciate the high accuracy over 100% of the IM measurements.
Features
- Precision PIM Analyzer for production and laboratory
- True 24/7 operation
- 3 Measurement modes: PIM Analyzer, PIM over Time, PIM over Frequency (Frequency Sweep)
- Forward and reverse PIM measurements ( 2-port)
- One unit of equipment holds the complete PIM Analyzer system
Specifications
|
Model Number / Type |
Tx Frequency (MHz) |
Rx Frequency (MHz) |
||
|
TETRA 400 |
390 ~ 400 |
380 ~ 384 |
||
|
E-TETRA400 |
420 ~ 430 |
410 ~ 412 |
||
|
AMPS/CDMA |
869 ~ 896 |
824 ~ 851 |
||
|
GSM900 |
935 ~ 960 |
890 ~ 915 |
||
|
EGSM900 |
925 ~ 960 |
880 ~ 915 |
||
|
LTE-JP1500 |
1488 ~ 1520 |
1456 ~ 1480 |
||
|
DCS/GSM1800 |
1805 ~ 1880 |
1710 ~ 1785 |
||
|
PCS1900 |
1930 ~ 1990 |
1850 ~ 1910 |
||
|
AWS |
2010 ~ 2155 |
1710 ~ 1755 |
||
|
TD-SCDMA(2000) |
2010 ~ 2025 |
1900 ~ 1920 |
||
|
UMTS/W-CDMA |
2110 ~ 2170 |
1920 ~ 1980 |
||
|
W-CDMA-JP |
2150 ~ 2170 |
2110 ~ 2140 |
||
|
IMT-E(2600) |
2620 ~ 2690 |
2500 ~ 2570 |
||
|
WiBro-KR |
2110 ~ 2170 |
1910 ~ 1990 |
||
|
Accessories |
||||
|
Opt. 2 |
Accessory Kit: (2) low PIM cables 3m / 10ft, (1) low PIM cable 1m / 3ft, low PIM load 100W, adapters, torque wrench with hard carry case |
|||
|
Opt. 3 |
Low PIM Load 100W, < 165 dBc @ 2* 43W, DIN 7/16 (f) |
|||
|
Opt. 4 |
PIM Source: Generator with preset PIM value. Quick indication of system functionality. Ideal for test and training. |
|||
|
Transmitter |
||||
|
Carrier Power |
+20 to +44 dBm (46 dBm optional) |
|||
|
Power Accuracy |
+/- 0.35 dB |
|||
|
Frequency Accuracy |
200 ppm |
|||
|
Reverse Pwr. Protection |
+43 dBm for 5 sec |
|||
|
Receiver |
||||
|
Reverse IM @ 2x43dBm |
-129 dBm / -172 dBc typ. |
|||
|
Noise Floor |
-140 dBm (300 Hz BW) |
|||
|
Dynamic Range(typical) |
> 96 dB (ref: -70 dBm) |
|||
|
Reverse Power Protection |
+43 dBm for 5 sec |
|||
|
Operational Input Power |
-40 dBm RMS |
|||
|
Max Input Power |
-10 dBm |
|||
|
Measurement Accuracy |
+/- 0.2 dB @ 2 x 43 dBm |
|||
|
Warm-up time (for full measurement accuracy) |
10 mins |
|||
|
Dimensions / Weight / Environment / Electrical |
||||
|
Dimensions |
488 x 653 x 278 (mm) |
|||
|
Weight |
35 kg |
|||
|
Temperature |
-10 °C to +40 °C |
|||
|
Humidity |
80%, RH (non condensing) |
|||
|
Protection |
IP20 (indoor use) |
|||
|
AC Power |
100 to 240V 50/60 Hz |
|||
|
Power Consumption |
750 Watts (VA) |
|||
Note: All data is subject to change without further notice.
