AWT Global PIM S1L Laboratory PIM Analyzers
Description
Passive Intermodulation (PIM) is an unwanted mixing effect caused by non-linearity of passive components in the RF path of telecommunication systems. PIM diverts signal energy to other frequencies (spurious signals). This can generate interfering signals that may fall into receiving bands causing serious degradation of system performance.
PIM S1L testers are ideal for component testing in the laboratory and/or during quality control. They provide a wealth of features that deliver accurate and reliable results. They are very easy to operate; it takes just one click to start a predefined test.
Modern telecommunication technologies demand PIM testing of network infrastructures and their components. Low PIM components are particularly important when wireless frequencies are combined. Signal degradation caused by PIM causes loss of capacity, which translates directly into dissatisfied customers as well as reduced revenues for the operators. Low PIM components are key to network optimization.
Features
- Test Modes: Diagnostic, Analyzer with Graphs, Sweep Mode (option), Distance to PIM (option), Distance to Fault (option)
- Very high PIM sensitivity: -172 dBc @ 2x 43 dBm carriers
- Output power variable from 15dBm to 44dBm. Perfect for IEC 62037 measurements, as well as for low power in-building DAS components
- Measures intermodulation products IM3, IM5 IM7, IM9, IM11 and IM13
- PIM over Time Graph and Sweep Mode
- Maxhold feature
- Data recording: CSV, PDF, Screenshot (BMP)
Specifications
|
Model Number |
Technologies / Type |
Tx Frequency (MHz) |
Rx Frequency (MHz) |
|
PS1L-700U |
LTE700 / 700 MHz Upper Band |
730 ~ 759 |
776 ~ 788 |
|
PS1L-700L |
LTE700 / 700 MHz Lower band |
728 ~ 759 |
698 ~ 716 |
|
PS1L-800 |
LTE800 |
791 ~ 821 |
832 ~ 862 |
|
PS1L-850 |
CDMA850 / 850 MHz |
869 ~ 896 |
824 ~ 851 |
|
PS1L-900 |
GSM900 / 900 MHz |
935 ~ 960 |
890 ~ 915 |
|
PS1L-900E |
EGSM900 |
925 ~ 960 |
880 ~ 915 |
|
PS1L-1500 |
LTE-1500 Japan / 1500 MHz |
1488 ~ 1520 |
1456 ~ 1480 |
|
PS1L-1800 |
GSM 1800 / DCS 1800 / 1800 MHz |
1805 ~ 1880 |
1710 ~ 1785 |
|
PS1L-1900 |
PCS 1900 / 1900 MHz |
1930 ~ 1990 |
1850 ~ 1910 |
|
PS1L-1921PA |
PCS 1900/ 1900 MHz |
1930 ~ 1935 |
1710 ~ 1755 |
|
PS1L-2100AWS |
AWS |
2110 ~ 2155 |
1710 ~ 1755 |
|
PS1L-2000TD |
TD-SCDMA(2000) |
2010 ~ 2025 |
1900 ~ 1920 |
|
PS1L-2100UMTS |
UMTS/W-CDMA / 2100 MHz |
2110 ~ 2170 |
1920 ~ 1980 |
|
PS1L-2160JP |
W-CDMA-JP |
2150 ~ 2170 |
2110 ~ 2140 |
|
PS1L-2600LTE |
IMT-E(2600) / LTE 2600 / 2600 MHz |
2620 ~ 2690 |
2500 ~ 2570 |
|
Accessories |
|||
|
POPT001 |
VSWR / DTP (Distance to PIM) Option |
||
|
POPT002 |
Accessory Kit: (2) low PIM cables 3m / 10ft, (1) low PIM cable 1m / 3ft, low PIM load 100W, adapters, torque wrench with hard carry case |
||
|
POPT004 |
PIM Source: Generator with preset PIM value. Quick indication of system functionality. Ideal for test and training. |
||
|
Transmitter |
|||
|
Carrier Power |
+15 to +44 dBm (46 dBm optional) |
||
|
Power Accuracy |
+/- 0.35 dB |
||
|
Frequency Accuracy |
200 ppm |
||
|
Reverse Pwr. Protection |
+43 dBm for 5 sec |
||
|
Receiver |
|||
|
Reverse IM @ 2x43dBm |
-129 dBm / -172 dBc typ. |
||
|
Noise Floor |
-138 dBm (300 Hz Bandwidth) |
||
|
DynamicRange(typical) |
> 96 dB (ref: -90 dBm) |
||
|
Reverse Power Protection |
+43 dBm for 5 sec |
||
|
Operational Input Power |
-45 dBm RMS |
||
|
Max Input Power |
-10 dBm |
||
|
Measurement Accuracy |
+/- 2 dB @ 2 x 43 dBm |
||
|
Distance to PIM / Distance to VSWR (Option) |
|||
|
DTP Accuracy |
0.5 m typ. |
||
|
DTF Accuracy (VSWR) |
0.5 m |
||
|
Cable Types |
Built-in list of cables |
||
|
Dimensions / Weight / Environment / Electrical |
|||
|
Dimensions |
521 x 396 x 236 (mm) |
||
|
Weight |
25.3 kg (55.7 lb) |
||
|
Temperature |
0 °C to +45 °C |
||
|
Humidity |
85%, RH (non condensing) |
||
|
Protection |
IP20 |
||
|
AC Power |
100 to 240V 50/60 Hz |
||
|
Power Consumption |
640 Watts (VA) |
||
