Haefely Hipotronics EFT/Burst Verification Set
Description
Haefely Hipotronics EFT/Burst Verification Set is designed to comply with the requirements of IEC/EN 61000-4-4:2004 to enable EMC engineers to verify their burst/EFT test generators periodically.
Measurements of individual impulse parameters are performed using a termination to match the EFT/Burst generator output impedance (50W) and a voltage divider to reduce the impulse level so it can be displayed on commercial oscilloscopes. The 50W attenuator, PAT 50 is to match the new amendment 2 and edition 2 requirements. An oscilloscope with minimum 400MHz band-width is required to properly display the EFT impulse.
Features
- PAT 50 50W load / attenuator 54dB
- PAT 1000 1kW load / attenuator 60dB
- Coaxial cable 1 meter
- User manual & Test certificate
- Functional case
01
02 Download Data Sheet
Print
Email
Specifications
| Divider Ratio PAT 50 | 54dB |
| Divider Ratio PAT 1000 | 60dB |
| Test Load Impedance | 50 ohm +- 2% |
| Test Load Impedance | 1000 ohm +- 2% // ≤ 6pF |
| BNC Cable length | 1m |
| Max. Impulse voltage | 5kV |
| Input connection | SHV |
| Output connections | 50W BNC connector |
| Dimensions (W x H x D) | 260 x 160 x 62mm |
| Net weight | 1.0 kg |
