Haefely Hipotronics PCD 150 Damped Oscillatory Wave Coupling Network for Data Control Lines
Description
Haefely Hipotronics PCD 150 Damped Oscillatory Wave Coupling / Decoupling Network for Data Control Lines is used for surge coupling onto unshielded data- and signal lines according to IEC/EN standards.
Damped oscillatory waves with both 100 kHz and 1 MHz up to 3.3kV peak as well as ring wave 100kHz with Z=200 Ohm up to 4.4kV peak can be coupled. Coupling and decoupling elements are included in one box because of the sensitive impulse shape. Manual coupling path switching for differential mode (transverse mode, line to line) and for common mode (longitudinal, line to earth) testing. Default coupling and protection elements are breakdown avalanche diodes. Therefore, the capacitive load to the EUT lines is low.
Features
- Damped oscillatory wave 100 kHz and 1 MHz
- Ring Wave 100 kHz with Z=200 Ohm
- Up to 4 wires can be tested with a single unit
- Up to 8 wires can be tested with two units
- Signal Bandwidth up to some 10 kHz
- Low capacitive load on the EUT lines
01
02Specifications
| Coupling Part | |
| Impulse shapes | Damped Oscillatory Wave with 100 kHz and 1 MHz
Ring wave 100 kHz, 200 Ohm |
| Impulse amplitude | Max. 3.3kV damped oscillatory waves
Max. 4.4kV ring wave 100 kHz |
| Coupling elements | Avalanche breakdown diodes |
| Decoupling Part | |
| Voltage on EUT lines | Max. 56VDC or 40VAC,RMS |
| EUT current | Max. 1A per path |
| EUT signal Bandwidth | up to some 10 kHz (dependent on system impedance) |
| Residual voltage at AUX input port | approx. 80V |
| Protection elements at AUX input port | Avalanche breakdown diodes
– from each line to each other line – from each line to ground Capacitors 5nF from each line to ground |
| Dimensions (W x H x D) | 24 x 16 x 12 cm |
| Weight | approx. 2 kg net |
