Haefely Hipotronics PDP 8000 Differential Impulse Measurement Probe
Description
Haefely Hipotronics PDP 8000 Differential Impulse Measurement Probe is used to measure Surge pulses for equipment calibration purposes required by a Surge generator in both Differential and Common modes. Common mode measurements are relatively straightforward as the measurement is of a single output referenced to earth potential. Differential measurements however require that both the high and common of a Surge generator output are measured.
Features
- Divider Ratio 1000:1
- Impulse measurement to 8kV
- Impulse duration measurement to 20ms
- Impulse rise time measurement from 400ns
- Single BNC output matches all oscilloscopes
- Separate power supply
- AC/DC measurement
- Can be used with any standard oscilloscope
- Qualified for use with all EMC IMPULSE generators
- Simple and Easy to install
- Reduces calibration time
- Reduces calibration errors
- Defined CMRR (Common Mode Rejection Ratio)
01
02
03 Download Data Sheet
Print
Email
Specifications
| Divider Ratio | 1000 : 1 |
| CMRR | ≥ 46dB |
| Common Mode Input Impedance | 30 k ohm |
| Differential Mode Input Impedance | 60 k ohm |
| Max. Impulse Voltage | 8000 V |
| Min. Impulse front time | 400 ns |
| Max. Impulse decay time | 20 ms |
| Input connections | 4mm “banana” plugs |
| Output connections | 50 ohm BNC connector |
| Maximum AC/DC Voltage | 690 V differential / 400V common mode |
| Dimensions (W x H x D) | 260 x 160 x 62mm |
| Weight | 1.0 kg |
