Amplifier Research 5S4G11 Solid State Amplifier 4 GHz – 10 GHz 5W

Description

Amplifier Research 5S4G11 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting. The 5S4G11, when used with a sweep generator, will provide a minimum of 5 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level.

The 5S4G11 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF Amplifier stages are protected from over temperature by removing the DC voltage to them if an over temperature condition occurs due to cooling blockage or fan failure. The unit can be returned to operate when the condition has been cleared.

 

Features

  • Broadband
  • Solid State Broadband
  • Mismatch Tolerant
  • Modulation Capability
  • Front Panel Gain Control
  • Automatic Primary Power Selection
  • RF Input Leveling Circuit – Overdrive Protection
  • Over Temperature Protection
  • Standard Remote Interfaces
Download Data Sheet
Print
Email

Specifications

RATED POWER OUTPUT

5 watts minimum

INPUT FOR RATED OUTPUT

1.0 milliwatt maximum

POWER OUTPUT @ 3dB COMPRESSION

Nominal

7.0 watts

Minimum

5.5 watts

POWER OUTPUT @ 1dB COMPRESSION

Nominal

6.0 watts

Minimum

4.5 watts

FLATNESS

±2.0 dB typical

±3.0 dB maximum

FREQUENCY RESPONSE

4.0-10.6 GHz instantaneously

INPUT FOR RATED OUTPUT

1.0 milliwatt maximum

GAIN (at maximum setting)

37 dB minimum

GAIN ADJUSTMENT (Continuous Range)

 10 dB minimum

INPUT IMPEDANCE

50 ohms, VSWR 2.5:1 maximum

OUTPUT IMPEDANCE

50 ohms, nominal

MISMATCH TOLERANCE

100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.

MODULATION CAPABILITY

Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal

HARMONIC DISTORTION

Minus 20 dBc maximum at 5 watts

THIRD ORDER INTERCEPT POINT

47 dBm typical

PRIMARY POWER

(Selected Automatically)

90-132, 180-264 VAC

50/60 Hz, single phase

175 watts maximum

COOLING

Forced air (self contained fans)

Stay informed

To keep you in the loop of our latest news, register now for our email newsletter.