Amplifier Research 200TR4G8 TWT Amplifier 4 GHz – 8 GHz 200W

Description

Amplifier Research 200TR4G8 is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier designed for applications where instantaneous bandwidth and high gain are required. A reliable TWT provides a conservative 200 watts minimum at the amplifier output connector. Stated power specifications are at the fundamental frequency.

The amplifier's front panel digital display shows forward and reflected output plus extensive system status information accessed through a series of menus via soft keys. Status indicators include power on, warm-up, standby, operate, faults, excess reflected power warning and remote.

Standard features include a built-in IEEE-488 (GPIB) interface, 0 dBm input, VSWR protection, gain control, RF output sample port, auto sleep, plus monitoring of TWT helix current, cathode voltage, collector voltage, heater current, heater voltage, baseplate temperature and cabinet temperature.

Modular design of the power supply and RF components allow for easy access and repair. Use of a switching mode power supply results in significant weight reduction.

This unit is designed for 19 inch rack mounting, offers four side mounted carry handles, plus non-slip feet for bench top use.

Model 200TR4G8 provides readily available RF power for a variety of applications in Test and Measurement, (including EMC RF susceptibility testing), Industrial and University Research and Development, and Service applications.

 

Features

  • Broadband
  • Forced air cooled
  • Digital display
  • AM, FM or pulse modulation
  • IEEE-488 (GPIB) interface
  • VSWR protection
  • Gain control
  • 0 dBm input
  • RF output Sample ports
  • Auto sleep
Download Data Sheet
Print
Email

Specifications

POWER (fundamental), CW, @ OUTPUT CONNECTOR

Nominal

262 watts

Minimum

200 watts

FLATNESS

±12 dB maximum at rated power

FREQUENCY RESPONSE

4-8 GHz instantaneously

INPUT FOR RATED OUTPUT

1.0 milliwatt maximum

GAIN (at maximum setting)

53 dB minimum

GAIN ADJUSTMENT (continuous range)

35 dB minimum

INPUT IMPEDANCE

50 ohms, VSWR 2.0:1 maximum

OUTPUT IMPEDANCE

50 ohms, VSWR 2.0:1 typical

MISMATCH TOLERANCE

Output power foldback protection at reflected power exceeding 40 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.

MODULATION CAPABILITY

Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.

NOISE POWER DENSITY

Minus 64 dBm/Hz (maximum)

Minus 70 dBm/Hz (typical)

HARMONIC DISTORTION

Minus 4 dBc maximum

Minus 7 dBc typical

PRIMARY POWER

190-260 VAC

50/60 Hz single phase

2 kVA maximum

CONNECTORS

RF input

Type N female on rear panel

RF output

Type N female on rear panel

RF output sample port

Type N female on rear panel

GPIB

IEEE-488 (f) on rear panel

Interlock

DB-15 (f) on rear panel

COOLING

Forced air (self contained fans), air entry and exit in rear.

SIZE (W x H x D)

48.3 x 26.7 (6U) x 68.6 cm, 19.8 x 10.5 (6U) x 27 in.

WEIGHT (approximate)

41 kg, 90 lbs.

Stay informed

To keep you in the loop of our latest news, register now for our email newsletter.