IFI SXL50 Solid State Amplifier 1 MHz – 10 MHz 50W
Description
IFI SXL50 solid state amplifier 1 MHz – 10 MHz 50W is a state-of-the-art RF power amplifier. IFI SXL-Series products are specifically designed for EW Jamming applications. These products are available in a wide range of power levels from 10 watts to kilowatts in multiple frequency ranges from 1 MHz – 6 GHz (See other model data sheets for other frequency ranges).
IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 1000 MHz.
IFI RF power amplifiers feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.
IFI’s extremely fast gate bias controls at all of the amplifier modules permit a fast access noise quieting function in less than 1 microsecond. Optional PIN diode T/R switches provide complete EW solutions with very low receiver path losses typically in the range of 1.5dB.
IFI system level products include an easy to read backlit LCD screen display for immediate indication of forward/reverse RF power, system status and self-diagnostic information. The systems also provide interface capabilities for control and status by, Ethernet, RS-232 (or RS-422 or RS-485) and IEEE interface formats.
Features
- Solid State LDMOS & GAN Designs
- Instantaneous Broadband Frequency Range
- Modular Design Construction
- Rugged Construction & High Reliability
- High Speed T/R Switching (Optional)
- Backlit LCD Display
- Integrated Force Air Cooling
- Self-diagnostic Circuitry
- IEEE-488 Interface, RS232 & Ethernet Remote
Specifications
Input/output Impedance |
50 ohms |
RF Input/ Sample Connectors |
Type N Female, unless specified otherwise |
RF Output Connector |
Type N Female up to 1KW amps, SC or 7/16 available, 7/16 2KW/3KW/5KW amps. |
Input VSWR |
2.0:1 |
Output VSWR |
2.5:1, 2.0:1 with full power |
Operating Temp |
0º to 50º C |
Non-operating Temp |
-40º to 70º C (50,000 feet max) |
Humidity |
95% without condensation |
Altitude |
10,000 feet |
Cooling System |
Air cooled, self contained |
Modulation |
AM, FM, Pulse |
Configuration |
Rack Mount |
Spurious Outputs |
<-60 dBc nominal |
Harmonics |
-20 dBc minimum @ Linear Power |
Standard Prime Powers |
100, 115, 120 VAC ±10% 50/60 Hz, single phase |
Special Prime Powers other then listed are subject to availability |