Comtech PST AR1929-10 Solid State Amplifier 1 GHz - 2 GHz 10W
Description
Series AR amplifiers are rack-mountable units which incorporate the Series AM amplifier in a cabinet containing a built-in universal AC power supply (for models up to 100 watts). Models are available for operation at frequencies from 1 MHz to 2 GHz and output power from 10 to 250 W. They are forced-air cooled by blowers built into the mechanical package. AR models are also available with an optional IEEE BUS for remote control and monitoring (ARD version).
Features
- Frequency Range: 1 GHz to 2 GHz; bandwidths to multi-octave
- Power Output: 10 to 250 watts
- CE Compliant
- Universal AC input (Models up to 100 watts)
Specifications
|
Frequency Range |
1-2 GHz Linear Amplifier |
|
|
Power Out |
10W |
|
|
Gain |
>40 dB |
|
|
RF input signals |
CW, FM, AM Pulse/phase modulation |
|
|
Small signal gain flatness |
1.0dB |
|
|
Noise figure |
10 dB typical |
|
|
Input VSWR |
2:1 |
|
|
Input Overdrive |
10 dB above 1 dB compression |
|
|
Small Signal Gain Flatness |
Small Signal Gain Flatness: ±1.0 dB |
|
|
Noise Figure |
10 dB Typical |
|
|
Harmonics |
-20 dBc |
|
|
Spurious Signals |
-60 dBc |
|
|
Input VSWR |
2:1 |
|
|
Load VSWR |
Open or short-circuit protected, unconditionally stable |
|
|
RF In/Out Connector |
Up to 50 W |
Type N, female bulkhead front panel mounted |
|
> 50 W |
Type N, female bulkhead rear panel mounted |
|
|
AC Input |
Universal AC input for models up to 100 watts Units above 100 watts are supplied at 220 VAC |
|
