ETS-Lindgren 3810-2 LISN 9 kHz - 30 MHz
Description
EMCO'S LISN MODELS 3810/2 is a multi-line low pass filter networks used for conducted emissions measurement.
It is placed between the power mains and the EUT (Equipment Under Test) to stabilize line impedance, provide a 50 ohm RF connection, and eliminate unwanted RF signals from the line supply. In addition, LISNs can be used to predict radiated emissions for diagnostic and pre-compliance testing.
The Model 3810/2 is designed and tested in accordance with IEC Publication 1010, Safety Requirements for Electronic Measuring Apparatus. It has also received CSA safety certification from the Canadian standards Association, a further indication of ETS-EMCO's commitment to safety.
Features
- 9 kHz to 30 MHz Frequency Range
- 10A or 16A Continuous Current Rating
- Earth Line Choke
- Artificial Hand Network
- High Pass Filter
- Choice of Plugs / Receptacles
- Manual or Remote Switched Test Ports
Specifications
|
Electrical Specifications |
|
|
Frequency Range |
9 kHz – 30 MHz |
|
Lines Plus Ground |
2 |
|
Power Source Frequency |
60 Hz (50 Hz Optional) |
|
Maximum Curent |
10A |
|
Maximum Voltage |
125 VAC Line to Ground (250 VAC Line to Ground optional) |
|
Network Inductance Impedance |
50µH / 250µH; 50 ohm |
|
Power In Connector |
IEC power inlet with customer specified plug |
|
Power Out Connector |
NEMA® |
|
Physical Specifications |
|
|
Depth |
38.1 cm (15.00 inches) |
|
Height |
15.2 cm (5.98 inches) |
|
Weight |
4.9 kg ( 10.80 lb ) |
|
Width |
22.2 cm (8.74 inches) |
