Fluke 1550C/Kit Insulation Resistance Tester Kit

Description

The new Fluke 1550C/Kit insulation resistance tester offers digital insulation testing up to 10 kV, making it ideal for testing a wide range of high voltage equipment including switchgear, motors, generators and cables.

Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating. With measurement storage and PC interface, the 1550C/Kit is a perfect tool for preventative or predictive maintenance programs designed to identify potential equipment failures before they occur.

Features

Test voltages up to 5kV provides solutions for all applications
CAT III 1000 V, CAT IV 600 V safety rating
Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety
Selectable test voltages in 50 V steps from 250 to 1000 V, and 100 V steps above 1000 V
Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
Long battery life gives the user over 750 tests between charges
Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
Guard system eliminates the effect of surface leakage current on high-resistance measurements
Large digital/analog LCD for easy viewing
Capacitance and leakage current measurement
Ramp function for breakdown testing
Resistance measurements up to 2TΩ
Timer settings up to 99 minutes for timed tests

Fluke 1550C/Kit Insulation Resistance Tester Kit

Download Data Sheet

Specifications

Insulation resistance measurement
Test voltage (dc)	Range (dc)		Accuracy (± reading)
250 V	< 200 kΩ 200 kΩ to 5 GΩ 5 GΩ to 50 GΩ > 50 GΩ		unspecified 5 % 20 % unspecified
500 V	200 kΩ 200 kΩ to 10 GΩ 10 GΩ to 100 GΩ > 100 GΩ		unspecified 5 % 20 % unspecified
1000 V	< 200 kΩ 200 kΩ to 20 GΩ 20 GΩ to 200 GΩ > 200 GΩ		unspecified 5 % 20 % unspecified
2500 V	< 200 kΩ 200 kΩ to 50 GΩ 50 GΩ to 500 GΩ > 500 GΩ		unspecified 5 % 20 % unspecified
5000 V	< 200 kΩ 200 kΩ to 100 GΩ 100 GΩ to 1 TΩ > 1 TΩ		unspecified 5 % 20 % unspecified
10000 V (1555 only)	< 200 kΩ 200 kΩ to 200 GΩ 10 GΩ to 2 TΩ > 2 TΩ		unspecified 5 % 20 % unspecified
Bar graph range	0 to 1 TΩ
Insulation test voltage accuracy	-0 %, +10 % at 1 mA load current
Induced ac mains current rejection	2 mA maximum
Charging rate for capacitive load	5 seconds per μF
Discharge rate for capacitive load	1.5 s/μF
Leakage current measurement	Range: 1 nA to 2 mA		Accuracy: ± (5 % + 2 nA)
Capacitance measurement	Range: 0.01 uF to 15.00 μF		Accuracy: ± (15 % rdg + 0.03 μF)
Timer	Range: 0 to 99 minutes		Resolution Accuracy: Setting: 1 minute Indication: 1 second
Live circuit warning	Warning Range: 30 V to 660 V ac/dc, 50/60 Hz		Voltage Accuracy: ± (15 % + 2 V)
General specifications
Display		75 mm x 105 mm
Power		12 V lead-acid rechargeable battery, Yuasa NP2.8-12
Charger Input (AC)		Charger Input (AC) 85 V to 250 V ac 50/60 HZ 20 VA
This Class II (double insulated) instrument is supplied with a Class 1 (grounded) power cord. The protective earth terminal (ground pin) is not connected internally. The extra pin is for added plug retention only.
Dimensions		170 mm x 242 mm x 330 mm (6.7 in x 9.5 in x 13 in)
Weight		3.6 kg (7.94 lb)
Temperature (operating)		-20 ºC to 50 ºC (-4 ºF to 122 ºF)
Temperature (storage)		-20 ºC to 65 ºC (-4 ºF to 149 ºF)
Humidity		80 % to 31 ºC decreasing linearly to 50 % at 50 ºC
Altitude		2000 m
Enclosure sealing		IP40
Input overload protection		1000 V ac
Electromagnetic compatibility		EN 61326

Fluke 1550C/Kit Insulation Resistance Tester Kit

Description

Features

Specifications

Please use form below to contact us.