Solar 8282-1 Transient Pulse Generator
Description
For Conducted Transient Susceptibility Testing, 0.15 µS – 5.0 µS – 10.0 µS up to 600 volts (peak)
The Solar 8282-1 Transient Pulse Generator was designed for screen room use in making conducted spike susceptibility tests. It provides all the wave shapes required by MIL-STD-461B/C and many other military EMI specifications.
Spike generators required for susceptibility testing have been our specialty since 1962, when our first unit, the Model 6254-1, was introduced. The Model 8282-1incorporates all the flexibility and technical excellence of the previous models and provides features required by specification MIL-STD-461B/C.
Features
- Provides outputs up to 600 volts peak amplitude for the 0.15, 5.0 and 10.0 µS spikes into a five ohm resistive load (low source impedance).
- A wide range of repetition rates allows spike injection in terms of the pulse rates of items being tested.
- The single pulse feature enables controlled isolation of transient effects.
- Adjustable pulse position on AC power lines relates the transient susceptibility to the real time aspects of digital circuitry served by AC power.
- Transients can be injected in synchronism with repetitive circuit functions as required by Method CS06 of MIL-STD-462.
- Remote triggering of single or repetitive pulses in terms of particular system characteristics.
- The upper terminals of the PARALLEL pair and the SERIES pair provide a positive-going spike on the 5 µS and the 10 µS modes. These terminals deliver a negative-going spike in the 0.15 µS mode. When the test plan requires both a positive and a negative spike, it is necessary to reverse the connections to the output terminals of the Model 8282-1 Spike Generator.
Specifications
|
Spike Durations |
Pushbutton selectable durations of 0.15 µS, 5.0 µS and 10.0 µS (±20%) to zero crossover, into 5.0 ohm resistive load |
|
Adjustable Peak Amplitude |
Up to 600 volts for 0.15 µS, 5.0 µS and 10.0 µS durations into five ohm non-inductive load |
|
Internal Impedance |
Less than 5.0 ohms for 0.15 µS, less than 2.0 ohms for 5.0 µS, less than 1.0 ohm for 10.0 µS |
|
Pulse Repetition Rate |
Less than 5.0 ohms for 0.15 µS, less than 2.0 ohms for 5.0 µS, less than 1.0 ohm for 10.0 µS |
|
Pulse Shape |
Ringing characteristic similar to Figure 19 in MIL-STD-462 when connected to non-inductive load |
|
Pulse Position |
Adjustable from 0° to 360° on 50 Hz, 60 Hz or 400 Hz power lines |
|
External Sync Operation |
Remotely trigger able up to 50 p.p.s. for 0.15 µS, up to 1000 p.p.s. for 5.0 and 10.0 µS |
|
Amplitude Display |
Panel meter is analog LED display of peak amplitude as it would be into a five ohm resistive load |
|
Power Current in Series Injection Mode |
up to 50 amperes of current at power frequencies |
|
Power Requirements |
115 volts 60 Hz, 3.0 amperes (230 volts 50 Hz, 1.5 ampere available) |
|
Size |
12.25″ wide , 8.7″ high 13″ deep (311 mm x 211 mm x 330 mm) |
|
Weight |
30 pounds |
