A.H. Systems BCP-615 Broadband Current Probe 10 kHz – 500 MHz
Description
A.H. Systems BCP-615 Broadband Current Probe 10 kHz – 500 MHz is capable of measuring pulse currents up to 100 amperes. Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes.
The BCP-615 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other 50 ohm impedance instruments to measure quantitative magnitudes of current. Measurements can be made on single and multi-conductor cables, ground and bonding straps, shielded conduits and on coaxial cables. A current probe acts as a single turn primary, multiple turn secondary transformer, placing low series impedance in the probed power line or signal lead while capable of driving a usable signal into a 50ohm receiver.
A current probe is characterized by its transfer impedance, ZT (dB ohm) the ratio of output voltage into a standard load (usually 50ohm for EMI testing) divided by the net current traveling through the probe window area.
Features
- 10 KHz to 500 MHz
- Pulse Currents up to 100 amperes
- Individually Calibrated included
- Split Type Clamp-on Design
Specifications
| Frequency Range | 10 kHz – 500 MHz |
| Transfer Impedance (dB ohm | -40 to +18 dBΩ |
| Max Primary Current (DC – 60 Hz) | 400 Amps |
| Max Primary Current (DC – 400 Hz) | 350 Amps |
| Max RF Current (CW) | 80 Amps |
| Peak Pulse Current | 100 Amps |
| Connector | N-Type, Female |
Physical Dimensions
| Aperture | 1.25″ (32 mm) |
| Weight | 1.2 lb.’s (0.55 Kg) |
