AE Techron 7136 High-speed AC/DC Amplifier
Description
AE Techron 7136 High-speed AC/DC Amplifier is a high-voltage, 900-VA, four-quadrant, that provides exceptional versatility and value. Compact size, user configurability, DC-Max™ topology, and AE Techron toughness makes the 7136 the ideal lab partner for DO-160 Section 16 AC with DC offset testing, or any application where more voltage or current is needed than is available from the signal source.
Front panel user controls give the 7136 a wide range of possible uses; gain, maximum current, and DC offset can be fixed or infinitely varied. It can produce a DC output without an input signal. DC output is independent of input signal and amplifier gain. This DC capability, when combined with an input signal from a function generator, creates a versatile DC source with high-speed ripple and dropout capabilities.
MODEL SERIES OVERVIEW
7100-series High-Speed AC/DC Amplifiers with Precision DC Supply
Features
- Up to 900 watts RMS power output
- Small signal response up to 400 kHz
- 5A from 13.5V DC to 48 VDC
- Slew rate: 165 V/µs
- Maximum output voltage: ±300 Vp or ±150 Vp
Specifications
| Frequency Response | DC – 150 kHz (1 watt): +0.0 to -3.0 dB | |
| 32-Ohm Power Response (continuous duty) | DC to 60 kHz | ± 250 Vpk |
| DC to 200 kHz | ± 130 Vpk | |
| Slew Rate | >165 V/µSec | |
| Residual Noise | 10 Hz to 22 kHz | <549 µV (0.549 mV) |
| 10 Hz to 500 kHz | <1485 µV (1.485 mV) | |
| Signal-to-Noise Ratio | 10 Hz – 22 kHz | –109 dB |
| 10 Hz – 500 kHz | –102 dB | |
| THD (DC – 50 kHz) | less than 0.1% | |
| DC Offset | Less than ±1 mV | |
| DC Drift (after 1 minute of operation) | Less than ±400 µV | |
| Output Impedance | 20 mOhm in Series with 0.95 µH | |
| Phase Response (10 Hz – 10 kHz) | ±10 degrees plus 1 µsec propagation delay | |
| Input Characteristics | ||
| Balanced with ground | Three terminal barrier block connector, 20k ohm differential | |
| Balanced with ground | Back-panel DB-9 connector (pins 1, 2 and 3), 20k ohm differential | |
| Unbalanced | BNC connector, 10k ohm single ended | |
| Gain (variable or fixed) | Voltage Mode | 40 volts/volt |
| Current Mode | 5 amperes/volt | |
| Gain Linearity (over input signal, from 0.2V to 5V) | AC | 0.15% |
| DC | 0.05% | |
| Max Input Voltage | ±10V, balanced or unbalanced | |
| Physical Characteristics | ||
| AC Power | Single phase, 120 VAC, 60 Hz | |
| Operating Temperature | 10°C to 50°C (50°F to 122°F), maximum output Power de-rated above 30°C (86°F) | |
| Weight | 40 lbs. (18.1 kg) | |
| Dimensions | 19.0 in. x 22.75 in. x 3.5 in. (48.3 cm x 57.8 cm x 8.9 cm) | |
