855-410-8212Cart (0) Items

AE Techron 7782HC Power Amplifier DC – 50 kHz 3300W

Description

AE Techron 7782HC Power Amplifier DC – 50 kHz 3300W is a small signal band-width, 150Vpk, and up to 150Apk power. The 7782 is the original member of the 7000 series, offered now as a remanufactured product; it offers a balance of great value, reliability and strong performance.

The 7782 works best into loads of 2 ohms or less. A single 7782 can provide 40mSec bursts up to 150Apk. For greater voltage or current, units can be combined in parallel or series to create arrays of amplifiers capable of pulses in excess of 500Vpk and 600Apk.

The 7782 can operate in either voltage or current operation modes. It is useful for a wide variety of EMC power susceptibility tests, including MIL STD- 461 and DO-160. The 7782 is also typically used as a gradient amplifier in small bore, high-gain MRI systems of up to 150Apk per axis.

Features

  • Over 3,300 watts RMS into a 2-ohm load
  • 40 msec pulses of up to 150 amperes peak into a 1-ohm load
  • System output of 500 volts and 200 amperes maximum are possible with multiple, interconnected amplifiers
  • Frequency bandwidth of DC to 50 kHz at rated power into 8 ohms; DC to 100 kHz at reduced power
  • Rugged chassis for stand-alone or rack mounted operation. No additional power supplies are required
  • Protection circuitry protects against input overloads, improper output connection (including shorted and improper loads), overtemperature, over-current, and supply voltages that are too high or low
  • Optional “P” versions offer precision control of output offset, DC drift and gain linearity
  • Shipped ready to operate from 208-volt (±10%) three-phase AC mains. Operation from 400-volt (±10%) An AC main is available on request
Download Data Sheet
Print
Email

Specifications

Input Characteristics
Balanced with Ground Three terminal barrier block connector 20k ohm differential
Gain Voltage Mode 20 volts/volt
Current Mode 20 amperes/volt
Residual Noise Less than 1 millivolt RMS
Slew Rate 40 volts per microsecond
Display, Control, Status
Front Panel
LED Displays indicate Ready, Standby, High AC Mains, High Temperature, Signal Overload, and Fault conditions in the output stage
Slide Switches for Run/Standby, LED Indicator Reset
Protection
Over/Under Voltage ± 10% from specified supply voltage amplifier is forced to Standby
Over Current Breaker protection on both main power and low voltage supplies
Over Temperature Separate Output transistor, heat sink, and transformer

temperature monitoring and protection
Physical Characteristics
Chassis All aluminum construction designed for stand-alone or rack-mounted operation; with sliver front panel and

black chassis; the amplifier occupies six EIA 19-inch-wide rack units
Weight 128 lbs. (57.9 kg)
AC Power Three-phase, 208 VAC ±10%, 47-60 Hz, 20A AC service; 400 VAC ±10%, 47-60 Hz, 10A AC service version available on request
Operating Temperature 10°C to 50°C (50°F to 122°F), Maximum Output Power de-rated above 30°C (86°F)
Humidity 70% or less, non-condensing
Cooling Internal fans forced air, 300 cfm
Dimensions (W x D x H) 19 in. x 22.37 in. x 10.5 in. (48.3 cm x 56.8 cm x 26.7 cm)
Categories
Industries
Standards
Related Products
Stay informed

To keep you in the loop of our latest news, register now for our email newsletter.

Follow us and use the following social media platforms to get in contact with us and to share your passion for the brand, products and services of Maxima.