Amplifier Research 1W1000B Solid State Amplifier 100 kHz – 1000 MHz
Description
The Model 1W1000B amplifier is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required. The 1W1000B, when used with an RF sweep generator, will provide a minimum of 1.0 watt of swept power.
Housed in a stylish, contemporary enclosure, the Model 1W1000B provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration and as a driver for frequency multipliers and high power amplifiers.
Features
Specifications
|
RATED OUTPUT POWER |
1 Watt minimum |
|
INPUT FOR RATED OUTPUT |
1.0 milliwatt maximum |
|
POWER OUTPUT @ 3dB compression |
Nominal – 2.5 Watts Minimum – 1.0 Watt |
|
POWER OUTPUT @ 1dB compression |
Nominal 2 Watts Minimum 1.0 Watt |
|
FLATNESS |
±0.5 dB typical ±1.0 dB maximum |
|
FREQUENCY RESPONSE |
100 kHz-1000 MHz instantaneously |
|
GAIN |
30 dB minimum |
|
INPUT IMPEDANCE |
50 ohms |
|
VSWR |
2.0:1 maximum |
|
OUTPUT IMPEDANCE |
50 ohms nominal |
|
MISMATCH TOLERANCE |
100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. |
|
MODULATION CAPABILITY |
Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. |
|
HARMONIC DISTORTION |
Minus 20 dBc maximum at 1.0 Watt |
|
THIRD ORDER INTERCEPT POINT |
– 42 dBm typical |
|
PRIMARY POWER |
90-264 VAC 47-440Hz, single phase 60 Watts maximum |
|
CONNECTORS |
See Model Configuration |
|
COOLING |
Forced air (self-contained fan) |
