AWT Global Expandable PIM Analyzers
Description
Production testing requires fast and highly reliable PIM analyzers. As the spectrum of manufactured products widens, PIM analysis may have to be performed on additional frequencies. AWT Global’s PIM Analyzer can be equipped with one to four different RF Units.
AWT’s Expandable PIM Analyzers grow with widening manufacturing requirements. The Main Control Unit can handle up to four RF Units with different frequency bands. To minimize expenses, customers can choose to start with only one basic frequency band and install additional RF Units later when needed. There is no need to send units back to the factory for the upgrade; additional RF Units can be installed in the field.
Whether growing with demand, or offering greatest flexibility with four frequency bands, AWT’s Expandable PIM Analyzers are a cost efficient solution for manufacturing and laboratory.
Features
- Control Unit can control up to 4 different RF Units.
- 3 Measurement Modes: PIM Analyzer, PIM over Time, PIM over Frequency (Frequency Sweep).
- RF Units measure forward & reverse PIM (2-port).
- Measures Intermodulation products IM3, IM5 IM7, IM9, IM11 and IM13
Specifications
|
Model Number / Type |
Tx Frequency (MHz) |
Rx Frequency (MHz) |
||
|
Master Control Unit |
All |
All |
||
|
RF Units |
||||
|
TETRA 400 |
390 ~ 400 |
380 ~ 384 |
||
|
E-TETRA400 |
420 ~ 430 |
410 ~ 412 |
||
|
AMPS/CDMA |
869 ~ 896 |
824 ~ 851 |
||
|
EGSM900 |
925 ~ 960 |
880 ~ 915 |
||
|
GSM900 |
935 ~ 960 |
890 ~ 915 |
||
|
LTE-JP1500 |
1488 ~ 1520 |
1456 ~ 1480 |
||
|
DCS/GSM1800 |
1805 ~ 1880 |
1710 ~ 1785 |
||
|
PCS1900 |
1930 ~ 1990 |
1850 ~ 1910 |
||
|
AWS |
2010 ~ 2155 |
1710 ~ 1755 |
||
|
TD-SCDMA(2000) |
2010 ~ 2025 |
1900 ~ 1920 |
||
|
UMTS/W-CDMA |
2110 ~ 2170 |
1920 ~ 1980 |
||
|
W-CDMA-JP |
2150 ~ 2170 |
2110 ~ 2140 |
||
|
IMT-E(2600) |
2620 ~ 2690 |
2500 ~ 2570 |
||
|
WiBro-KR |
2110 ~ 2170 |
1910 ~ 1990 |
||
|
Accessories |
||||
|
Opt. 2 |
Accessory Kit: (2) low PIM cables 3m / 10ft, (1) low PIM cable 1m / 3ft, low PIM load 100W, adapters, torque wrench with hard carry case |
|||
|
Opt. 3 |
Low PIM Load 100W, < 165 dBc @ 2* 43W, DIN 7/16 (f) |
|||
|
Opt. 4 |
PIM Source: Generator with preset PIM value. Quick indication of system functionality. Ideal for test and training. |
|||
|
Transmitter |
||||
|
Carrier Power |
+20 to +44 dBm (46 dBm optional) |
|||
|
Power Accuracy |
+/- 0.35 dB |
|||
|
Frequency Accuracy |
200 ppm |
|||
|
Reverse Pwr. Protection |
+43 dBm for 5 sec |
|||
|
Receiver |
||||
|
Reverse IM @ 2x43dBmForward IM @ 2x43dBm |
-129 dBm / -172 dBc typ.-125 dBm / -168 dBc typ. |
|||
|
Noise Floor |
-140 dBm (300 Hz BW) |
|||
|
DynamicRange(typical) |
> 96 dB (ref: -70 dBm) |
|||
|
Reverse Power Protection |
+43 dBm for 5 sec |
|||
|
Operational Input Power |
-40 dBm RMS |
|||
|
Max Input Power |
-10 dBm |
|||
|
Measurement Accuracy |
+/- 0.2 dB @ 2 x 43 dBm |
|||
|
Dimensions / Weight / Environment / Electrical |
||||
|
Dimensions |
483 x 305 x 500 (mm) |
|||
|
Weight |
11.7 kg |
|||
|
Temperature |
-10 °C to +40 °C |
|||
|
Humidity |
80%, RH (non condensing) |
|||
|
Protection |
IP20 |
|||
|
AC Power |
100 to 240V 50/60 Hz |
|||
|
Power Consumption |
88 Watts (VA) |
|||
