AWT Global UBA 9290 RF Field Strength & Spectrum Analyzer
Description
AWT’s new Field Strength Analyzer UBA 9290 with spectrum capability is a powerful, yet affordable RF tool for field and laboratory. AWT Global’s new UBA 9290 is battery operated, hand-held RF Field Strength Meter with spectrum capability. It is ideal for measuring various RF signals, and with a frequency range of 100 kHz to 2900 MHz, it is suitable for many applications in telecommunications, Cable TV, RFID, Wi-Fi, and general analysis, service and maintenance of RF systems. The low noise floor of -117 dBm allows detecting and analyzing even weak signals. With its basic spectrum analyzer functionality, the UBA 9290 is well suited for many applications in the field, laboratory and production. It provides engineers and technicians a cost-effective but powerful tool for RF signal analysis and that at a fraction of the cost of a full-features conventional spectrum analyzer. With its user friendly interface, the UBA 9290 is very easy to use. It allows to conveniently setting measurements, but offers also 100 presets such as predefined range or channel settings and other special functions that are commonly used in analog communication systems. The analyzer supports high-speed USB and includes software that controls the instrument from a PC. Measurement data can be stored on the computer for further analysis. The affordable handheld RF Field Strength Analyzer UBA 9290 is an ideal tool for field testing installing and maintaining mobile telecommunication systems such as cellular phones, Cable and Satellite TV Systems as well as performing antenna site measurements and maintenance.
Features
- Measurement Range 100 kHz to 2.9 GHz
- High Sensitivity -117 dBm
- Built-in Frequency Counter 9 MHz to 2.1 GHz
- Handheld and Battery operated
- TFT Color LCD Display 320 x 240
- Display modes: Spectrum Analyzer, Bar Graph (5/11/21/51/101/201 Channels, Single Bar, Difference)
- Sweep Mode (Free Run, Single Run, Squelch Run)
- Markers: 1,2, Delta, Peak, Center
- Memory: 100 Waveforms / Settings
Specifications
Frequency |
|
Range |
100 kHz to 2.9 GHz |
Accuracy |
TXO: +/- 2.5 ppm |
Reception sensitivity |
0 – 6 dBu EMF (S/N 10 dB @ W-FM, 12 dB @ N-FM) |
Resolution |
5 kHz (multiples of 5 kHz) |
Step range |
Multiples of 5 kHz and 6.25 kHz |
Span range |
1 MHz to 1 GHz |
Amplitude |
|
Units |
dBm, dBmV, dBuV |
Range |
-32 to – 117 dBm (N-FM) |
Resolution |
0.1 dB |
Accuracy |
2 dB (23°C +/- 3°C) |
Bandwidth |
N-FM: 12.5 kHz, W-FM: 180 kHz, AM/SSB: 2.4 kHz |
Attenuator |
10, 20, 30 & 35 dBm |
Spurious noise level |
-45 dBc (N-FM), -35 dBc (W-FM) |
Input impedance |
50 Ohms / 75 Ohms |
Connector |
N-type female |
Max input level |
10 dBm, 5 Vrms |
Sweep |
|
Speed |
500 ms |
Trigger source |
N-FM, W-FM, AM, SSB |
Trigger mode |
Free, single, continuous, squelch |
Marker mode |
Off, 1, 2, delta, peak, center |
Memory |
|
Trace& setting storage |
100 waveforms and settings |
Display |
|
Type |
Color TFT 320 x 240 |
Frequency Counter |
|
Frequency range |
9 MHz to 2.1 GHz |
Connector |
BNC female |
Impedance |
50 Ohms |
Resolution / Digits |
1 kHz, 7 digits |
Accuracy |
50 ppm, +/- 1 count |
Sampling time |
512 ms |
Input sensitivity |
150 mV ( 9 MHz – 2.1 GHz) |
Max input voltage |
5 Vrsm |
Computer Interface |
|
USB |
Cable included |
Audio |
|
Output |
1 W into 8 Ohm speaker |
Power |
|
Battery |
6x AA-Type, Ni-MH, 1.2V, 2.700 mAh, rechargeable (inlcuded) |
Adapter |
Output DC 9V, AC 100 – 240V, 50/60Hz |
Environment |
|
Operating Temperature |
0°C to 40°C |
Relative humidity |
35 to 85%, non condensing |
Storage temperature |
-10°C to 50°C |
Physical Specifications |
|
Dimensions |
82 x 205 x 36 mm (3.2 x 8.1 x 1.4 inches) |
weight (w/o batteries) |
395 g (0.87 lbs) |
Note: Specifications and data subject to change without further notice.