California Instruments 2253i/iX Precision Prog. AC Source 2250 VA
Description
The Compact iX Series represents a new generation of AC/DC power sources that address the increasing demands on test equipment to perform additional functions at a lower cost. By combining a flexible AC/DC power source with a high performance power analyzer, the Compact iX Series is capable of handling complex applications that have traditionally required multiple systems.
The sleek integrated approach of the Compact iX Series avoids cable clutter that is commonly found in test systems. All connections are made internally and the need for digital multimeters, power harmonics analyzers, and current shunts or clamps is eliminated.
Since many components in the Compact iX Series are shared between the AC/DC source and the power analyzer, the total cost of the integrated system is less than the typical cost of a multiple unit system.
For less demanding applications, the Compact i Series provide similar output and transient capabilities as the Compact iX Series, as well as basic power measurements.
Features
- 750 VA to 2250 VA of AC Output Power
- Combines AC/DC source and power analyzer
- Harmonic analysis of Voltage and Current
- AC, DC and AC+DC Output Modes
- Multiple Chassis Configurations
- Powerful output transient generation
- High Crest Factor Capability
- Arbitrary waveform generation
- Single and Three Phase models available
Specifications
|
Input |
||||
|
Model |
751i/iX |
1501i/iX |
2253i/iX |
|
|
Voltage |
115Vrms +/- 10% or |
115Vrms +/- 10% or |
115Vrms – 230Vrms +/- 10% (Universal Input) – (Output rated 1500 VA @ 115 V input. 115V-180V input derated linearly 1500 VA – 2250 VA) |
|
|
Frequency |
47 – 63 Hz |
47 – 63 Hz |
47 – 63 Hz |
|
|
Current |
<8.5 Arms @ 115 V |
<17 Arms @ 115 V |
<20 Arms @ 115 V |
|
|
PF |
0.97 (typical @ full load) |
0.97 (typical @ full load) |
0.98 (typical @ full load) |
|
|
Efficiency |
80% |
80% |
77% |
|
|
AC Output |
||||
|
Model |
751i/iX |
1501i/iX |
2253i/iX |
|
|
Voltage |
Hi : 0 – 300Vrms |
Hi : 0 – 300Vrms |
Hi : 0 – 300Vrms |
|
|
Max. Current |
Hi : 3.25Arms |
Hi : 6.5Arms |
Hi : 3.25Arms (per phase) |
|
|
Peak Current |
Hi : 10 A Peak |
Hi : 20 A Peak |
Hi : 10 A Peak (per phase) |
|
|
AC Power |
750VA |
1500VA |
750VA (per phase) |
|
|
Distortion |
< 1% THD |
< 1% THD |
< 1% THD |
|
|
DC Output |
||||
|
Model |
751i/iX |
1501i/iX |
2253i/iX |
|
|
Voltage |
Hi : 0 – 400Vdc |
Hi :0 – 400Vdc |
Hi : 0 – 400Vdc |
|
|
Max Current |
Hi : 1.63Adc |
Hi : 3.25Adc |
Hi : 1.63Adc (per phase) |
|
|
High Range |
500W |
1000W |
500W (per output) |
|
|
Low Range |
250W |
250W |
500W (per output) |
|
|
Voltage Accuracy/Programming Resolution (AC/DC) |
||||
|
Model |
751i/iX |
1501i/iX |
2253i/iX |
|
|
Accuracy(ALC Mode ON) |
0.1% FS (from 5V to FS) |
0.1% FS (from 5V to FS) |
0.1% FS (from 5V to FS) |
|
|
Programming Resolution |
0.1V |
0.1V |
0.1V |
|
|
Frequency |
||||
|
Model |
751i/iX |
1501i/iX |
2253i/iX |
|
|
Range |
16 – 1000Hz |
16 – 1000Hz |
16 – 1000Hz |
|
|
Resolution |
0.01 Hz (16 – 81.91 Hz), |
0.01 Hz (16 – 81.91 Hz), |
0.01 Hz (16 – 81.91 Hz), |
|
|
Accuracy |
0.025% |
0.025% |
0.025% |
|
|
Measurements |
||||
|
Model |
751i/iX |
1501i/iX |
2253i/iX |
|
|
Voltage Accuracy |
V: 0.1% FS |
V: 0.1% FS |
V: 0.1% FS |
|
|
Current Accuracy |
C: 0.5% FS |
C: 0.5% FS |
C: 0.5% FS |
|
|
Mechanical Specifications |
||||
|
Model |
751i/iX |
1501i/iX |
2253i/iX |
|
|
Dimensions |
H: 3.5“ (89mm) |
H: 3.5“ (89mm) |
H: 5.25“ (133mm) |
|
|
Weight |
|
|
|
|
|
Operating Temperature |
|
|
|
|
|
Interfaces |
||||
|
Model |
751i/iX |
1501i/iX |
2253i/iX |
|
|
USB |
Standard |
Standard |
Standard |
|
|
GPIB |
Option (i) Std (iX) |
Option (i) Std (iX) |
Option (I) Std (IX) |
|
|
LAN (LXI Ethernet) |
Option (iX) |
Option (iX) |
Option (IX) |
|
|
RS232 |
N/A |
N/A |
Standard |
|
|
Note: Specifications are subject to change without notice. Specifications are warranted over an ambient temperature range of 25°± 5° C. Unless otherwise noted; specifications are per phase for a sine wave with a resistive load and apply after a 30 minute warm-up period. For three phase configurations, all specifications are for L-N. Phase angle specifications are valid under balanced load conditions only. |
||||
