California Instruments RS180 High Power AC&DC Power Source 180kVA

Description

The RS Series consists of multiple high power AC and DC power systems that provide controlled AC and DC output for ATE and product test applications. This high power AC and DC test system covers a wide spectrum of AC and DC power applications at an affordable cost. Using state-of-the-art PWM switching techniques, the RS series combines compactness, robustness and functionality in a compact floor-standing chassis, no larger than a typical office copying machine. This higher power density has been accomplished without the need to resort to elaborate cooling schemes or additional installation wiring. Simply roll the RS unit to its designated location (using included casters), plug it in, and the RS series is ready to work for you.

Features

High Power AC and DC Power Source
Programmable AC and DC power for frequency conversion and product test applications
Expandable Power Levels
Available output power of 90 kVA per unit and multi-unit configurations for power requirements up to 540 kVA and above
Arbitrary & Harmonic Waveform Generation
User defined voltage waveform and distortion programming
Regenerative, bidirectional “Green” Power Solution
Automatic crossover between Source and Sink power mode offers regenerative capabilities. Regenerate up to 100% of the rated output power back to the utility grid during sink mode operation. (-SNK option)
Remote Control
Standard RS232C & USB along with optional IEEE-488 & LAN Interfaces are available for automated test applications

California Instruments RS180 High Power AC&DC Power Source 180kVA

Specifications

Operating Modes

RS90

AC, DC and AC+DC

AC Mode Output

Frequency

Range: 16.00-819.0 Hz, -LF Option: 16.00-500.0 Hz, -HF Option: 16.00-1000 Hz (supplemental specifications apply above 819 Hz). Resolution: 0.01 Hz: 16.00 – 81.91 Hz, 0.1 Hz: 82.0 Hz – 819.1 Hz, 1 Hz: 820-1000 Hz, SNK 16-500Hz

Phase Outputs

3 Phase, Neutral Floating, Coupling DC (except -HV Opition and -XU)

Total Power

RS90: 90kVA, RS180: 180kVA, RS270: 270kVA, RS360: 360kVA, RS450: 450kVA, RS540: 540kVA. Please consult factor for power levels above 540kVA

Load Power Factor

0 to unity at full output current

AC Mode Voltage

Voltage Ranges

External Sense

Range

V Low

V High

< 0.25 % FS DC to 100 Hz,
< 0.5 % FS 100 Hz to 819 Hz

< 0.1% FS for 10 % line change

0-150 V

0-300 V

Load Reg

AC + DC

0-150 V

0-300 V

Line Reg

Voltage drop compensation (5% Full Scale)

Harmonic Distortion (Linear)

Less than 0.5% from 16 – 66 Hz, Less than 1% from 66 – 500 Hz, Less than 1.25% above 500 Hz

DC Offset

< 20 mV

Load Regulation

0.25% FS @ DC – 100 Hz, 0.5% FS > 100 Hz

External Amplitude Modulation

Depth: 0 – 10 %, Frequency: DC – 2 KHz

Voltage slew rate

200 µs for 10% to 90% of full scale change into resistive load, 0.5V / µSec

AC Mode Current

Steady State AC Current @ Full Scale Voltage Output

Peak Repetitive AC Current

Model

RS90

RS180

RS270

RS360

RS450

RS540

V Low

200A

400A

600A

800A

1000A

1200A

V High

100A
Per Phase

200A
Per Phase

300A
Per Phase

400A
Per Phase

500A
Per Phase

600A
Per Phase

Note: Constant power mode provides increased current at reduced voltage.
See chart below for power up to 125% of Full Scale Current Output at reduced voltages.

Up to 3.6 x rms current at full scale voltage

Programming Accuracy

Voltage (rms): ± 0.3 Vrms, Frequency: ± 0.01 % of programmed value, Current Limit: – 0 % to + 5 % of programmed value + 1A, Phase: < 0.5° + 0.2°/ 100 Hz with balanced load

Programming Resolution

Voltage (rms): 100 mV, Frequency: 0.01 Hz from 16 – 81.91 Hz, 0.1 Hz from 82.0 – 819 Hz, Current Limit: 0.1 A, 3 phase mode, 1.0 A, 1 phase mode, Phase: 0.1°

AC Mode Current

Steady State AC Current @ FS V

Parameter

Frequency

RMS
Voltage

RMS
Current

Peak Current

VA
Power

Real Power

Power Factor (>0.2
kVA)

Range

16.00 –
820.0Hz

0-400V

0 – 300A

0 – 800 Amps

0–90
KVA

0–90
KW

0.00 –
1.00

Accuracy* (±)

0.01% +
0.01Hz

0.05V
+0.02%,
<100Hz
0.1V
+.02%,
100 –
820Hz

0.5A
+0.2%,
<100Hz
0.5A
+0.5%,
100 -500Hz
0.5A
+1.0%,
>500Hz

0.5A +0.2%,
<100Hz
0.5A +0.5%, 100 – 500Hz
0.5A +1.0%,
>500Hz

90VA
+0.2%, <100Hz
90VA
+0.5%,
100 –
500Hz
90VA
+1.0%, >500Hz

90W
+0.2%, <100Hz
90W
+0.5%,
100 –
500Hz
90W
+1.0%, >500Hz

0.01, <100Hz
0.02,
100 – 820Hz

Resolution*

0.01 to 81.91Hz
0.1 to 500Hz
1Hz above 500Hz

0.01V

0.01A

10VA

10W

0.01

Note: Constant power mode provides increased current at reduced voltage.

Measurements – Harmonics

Parameter

Range

Accuracy* (±)

Resolution

Frequency Fundamental

Phase

16.00 – 820 Hz

0.03% + 0.03 Hz

0.01 Hz

Frequency harmonics

RS90 RS180 RS270 RS360 RS450 RS540

32.00 Hz – 16 KHz

0.03% + 0.03 Hz

0.01 Hz

RS90-3Pi

32.00 Hz – 48 KHz

0.03% + 0.03 Hz

0.01 Hz

0.0 – 360.0°

2° typ.

0.5°

Voltage

Fundamental

0.75V

0.01V

Harmonic 2 – 50

0.75V + 0.3% + 0.3%/kHz 0.01V

Current

Fundamental

0.5A

0.1A

Harmonic 2 – 50

0.15A + 0.3% + 0.3%/kH 0.1A

Note: For current measurements, specifications apply from 2% to 100% of measurement range.

DC Mode Output

Power

Maximum DC Power at full scale of DC voltage range.
RS90: 45kW, RS180: 90kW, RS270: 135kW, RS360: 180kW, RS450: 225kW, RS540: 270kW

Voltage Ranges

Range: Low (0 – 200 V), High (0 – 400 V)

Output Accuracy

± 1 Vdc

Load Regulation

< 0.25 % FS

Line Regulation

< 0.1% FS or 10 % line change

Ripple

< 2 Vrms Lo Range, < 3 Vrms Hi Range

DC Mode AC+DC Mode

Model	RS90	RS180	RS270	RS360	RS450	RS540
V Low	100A	200A	300A	400A	500A	600A
V High	50A	100A	150A	200A	250A	300A
	Per Phase	Per Phase	Per Phase	Per Phase	Per Phase	Per Phase

Note: Constant power mode provides increased current at reduced voltage.

Current Limit

Programmable from 0 A to max. current for selected range

AC+DC Mode Output

Output Power

Maximum current and power in AC+DC mode is same as DC mode

Protection

Over Load

Remote shutdown, External Sync, Clock/Lock

Outputs

Function Strobe / Trigger out, Clock/Lock

System Interface

Inputs

Remote shutdown, External Sync, Clock/Lock

Outputs

Function Strobe / Trigger out, Clock/Lock

Remote Control

IEEE-488 Interface

IEEE-488 (GPIB) talker listener. Subset: AH1, C0, DC1, DT1, L3, PP0, RL2, SH1, SR1, T6, IEEE-488.2 SCPI Syntax

RS232C Interface

9 pin D-shell connector (Supplied with RS232C cable)

LAN ( option )

Ethernet Interface: 10BaseT, 100BaseT, RJ45

USB

Version: USB 1.1; Speed: 460 Kb/s maximum

Output Relay

Push button controlled or bus controlled output relay

Waveforms

Waveform Types

Sine, Square, Clipped sine, User defined

User defined waveform storage

Four groups of 50 user defined arbitrary waveforms of 1024 points for a total of 200. One group can be active at a time

AC Input

Voltage

Must be specified at time of order. All inputs are L-L, 3ø, 3 wire + Gnd. 208 ± 10% VAC, 230 ± 10% VAC, 400 ± 10% VAC, 480 ± 10% VAC

Line Voltage
(3 phase, 3 wire + ground (PE))

208 VLL ±10%, 230 VLL ±10%, 400 VLL ±10%, 480 VLL ±10%

Line VA

RS90	RS180	RS270	RS360	RS450	RS540
106 KVA	212 KVA	318 KVA	424 KVA	530 KVA	636 KVA
350 ARMS @ 187 VLL	Each RS90 chassis requires its own AC service.
314 ARMS @ 207 VLL	Total Line currents are 2 x RS90	Total Line currents are 3 x RS90	Total Line currents are 4 x RS90	Total Line currents are 5 x RS90	Total Line currents are 6 x RS90
180 ARMS @ 360 VLL
150 ARMS @ 432 VLL

Line Frequency

47 – 63 Hz

Efficiency

85 % (typical) depending on line and load

Power Factor

0.95 (typical) / 0.99 at full power.

Inrush Current

RS90	RS180	RS270	RS360	RS450	RS540
460 Apk @ 208 VLL	Each RS90 chassis requires its own AC service. Total Line currents are 2 x RS90	Each RS90 chassis requires its own AC service. Total Line currents are 3 x RS90	Each RS90 chassis requires its own AC service. Total Line currents are 3 x RS90	Each RS90 chassis requires its own AC service. Total Line currents are 5 x RS90	Each RS90 chassis requires its own AC service. Total Line currents are 6 x RS90
440 Apk @ 230 VLL
264 Apk @ 400 VLL
220 Apk @ 480 VLL

Hold-Up Time

>10ms

Isolation Voltage

2200 VAC input to output, 1350 VAC input to chassis

AC Service

Inputs/Outputs

Rear Panel Access

Regulatory

IEC61010, EN50081-2, EN50082-2, CE EMC and Safety Mark requirements

EMI

CISPR 11, Group1 , Class A

Connectors

AC Input and Output terminal blocks behind rear panel access cover. IEEE-488 (GPIB) connector behind rear panel access cover. 9 pin D-Shell RS232C connector*, behind rear panel access cover. Remote voltage sense terminal block behind rear panel access cover. System Interface Connector, DB-37 behind rear panel access cover. *RS232 DB9 to DB9 cable supplied

Physical Dimensions

RS90 Dimensions

Height: 74.5″ (1892.3 mm) , Width: 30.3″ (769.6mm), Depth: 38.3″ (972.8mm),

RS90 Weight

Net: 2150 lbs / 975 Kg approximately, Shipping: 2450 lbs / 1111 Kg approximately

Chassis

RS90: Casters and forklift openings

Vibration and Shock

Designed to meet NSTA project 1A transportation levels. Units are shipped in wooden crate with forklift slots

Air Intake/Exhaust

Forced air cooling, front air intake, rear exhaust

Operating Humidity