QuadTech Guardian 6000 Plus Electrical Safety Analyzer
Description
The Guardian 6000 Plus is able to perform several dielectric tests in one unit including AC/DC Hipot, Insulation Resistance, Ground Bond, Open/Short Check and optional Leakage Current for compliance testing of IEC, UL, TUV, CSA, EN and other standards including IEC60601-1, UL2601-1, IEC950, UL544, UL60950. The time-saving TwinPort feature performs Hipot and Ground Bond simultaneously cutting time for these tests in half. The open / short check function (OSC) checks for an open connection or a DUT short during testing. Open connections may cause a bad DUT to test OK. Screening for shorts prevents damage to the equipment saving potential costs that may occur. These patented features are only available in safety products manufactured by Chroma.
Features
- Five instruments in one: AC Hipot , DC Hipot, Insulation Resistance, Ground Bond and Leakage Current (Option)
- Twin-Port™ feature (Patented)
- Programmable output voltage to 5kV AC and 6kV DC
- Insulation resistance to 50GO/1000V DC
- Ground bond up to 30A (Option up to 40A / 60A)
- Open/Short check (OSC) function
- ARC detection (Flashover)
- Password Protected front panel lockout
- Storage of 50 Tests Setups with 100 Steps per setup
- Optional dynamic leakage current auto scanning
- Standard RS-232 Interface
- Standard GB OFF.S.ET KIT, SCANNER Interface
- Optional GPIB Interface
Specifications
|
Withstanding Voltage Test |
|
|
Output Voltage |
DC:0.05 ~ 6kV , AC : 0.05 ~ 5kV |
|
Load Regulation |
±(1% of reading +0.1% of range) |
|
Voltage Regulation |
2V |
|
Voltage Accuracy |
±(1% of reading +0.1% of range) |
|
Cutoff Current |
DC : 20mA , AC : 40mA |
|
Current Resolution |
0.1 μA DC |
|
Current Accuracy |
±(1% of reading +0.1% of range) |
|
Output Frequency |
50Hz / 60Hz |
|
Test Time |
0.3 ~ 999 sec , continue |
|
Ramp Time |
0.1 ~ 99.9 sec, Off |
|
Fall Time |
0.1 ~ 99.9 sec, Off |
|
Waveform |
Sine wave |
|
Insulation Resistance Test |
|
|
Output Voltage |
DC : 0.05 ~ 1kV |
|
Voltage Resolution |
2V |
|
Voltage Accuracy |
±(2% of reading +0.5% of range) |
|
IR Range |
1MΩ ~ 50GΩ |
|
Resistance Resolution |
0.1MΩ |
|
Resistance Accuracy |
5% typical |
|
Ground Bond Test |
|
|
Output Current |
AC : 1 ~ 30A (40A, 60A optional) |
|
Current Accuracy |
±(1% of reading +0.2% of range) |
|
GR Range |
10mΩ ~ 510mΩ |
|
Resistance Resolution |
0.1mΩ |
|
Resistance Accuracy |
± (1% of reading + 0.1% of full scale) |
|
Test Method |
4 wires |
|
General |
|
|
Operation Environment Temperature |
0°C ~ 40°C, Humidity : ± 80 % RH |
|
Power Consumption |
No load : < 100 W With rated load : 800 W |
|
Power Requirements |
90~132Vac or 198~264Vac, 47~66Hz |
|
Weight Approx. |
20KG(19032) 25KG (19032-P) |
