Com-Power AH-826 Double Ridged Waveguide Horn Antenna 18 GHz–26.5 GHz
Description
Model AH-826 is a broadband linearly polarized double ridged waveguide horn antenna designed specifically for Electromagnetic Interference testing. This antenna can be used for receive as well as transmit applications for the frequency range of 18 GHz to 26.5 GHz.
This antenna has high gain, with at least 23 dBi over the entire frequency range. This antenna can accept up to 5 Watts of input power at its terminals in continuous mode in the applicable frequency range for generating electromagnetic fields for immunity testing.
The AH-826 Horn antenna has a K type connector which can mate with SMA type connector. The antenna is constructed using lightweight aluminum with a corrosion resistant finish. The oval rear plate has a 1/4″ x 20 threaded hole for mounting it to the Com-Power AT-100 tripod.
Features
- Broadband – 18 GHz to 26.5 GHz
- High Gain – Lower Floor Noise for Emissions
- Individual Calibration
Com-Power AH-826 Application
The AH-826 was designed for EMC testing, but can also be used for antenna gain pattern measurements, surveillance, and other applications. The wide frequency band makes the AH-826 antenna is suitable for sweep measurement, reducing the need for antenna switching during the test.
High gain reduces input power requirements to achieve the desired field strength levels for immunity testing and improves antenna sensitivity to low level signals during emissions testing. The measured field strength can be calculated by adding the antenna factor for the particular frequency to voltage measured at the antenna output terminal.
Specifications
|
Frequency Range |
18 GHz – 26.5 GHz |
|
Power handling |
5 Watts CW |
|
VSWR |
2.0 :1.0 |
|
Polarization |
Linear |
|
Connector type |
K type (will mate with SMA) |
|
Impedance |
50 Ohms |
|
Weight |
1.5 lbs. (0.68 kg) max. |
|
Size (L x W x H) |
8.7 x 5.7 x 9 inches max. |
|
22 x 14.5 x 22.8 cm max. |
