E&I 2200L RF Power Amplifier 10 kHz – 12 MHz 200W
Description
E&I 2200L RF Power Amplifier 10 kHz – 12 MHz 200W is a rugged source of RF power, useful for ultrasonic, laser modulation, RFI/EMI, plasma equipment and general laboratory applications. The 2200L represents E&I’s commitment to providing RF power amplifiers of the highest quality, durability and ruggedness.
FLEXIBILITY:
The 2200L produces 200 Watts of class A linear power output over the entire frequency range from 10 kHz to 12 MHz. It has very low harmonic distortion along with low IMD products. Operation over the band is achieved without the need for any band switching or indeed any adjustments. The power gain is rated at 53 dB with a typical gain flatness of ±1.5 dB.
RUGGEDNESS:
The 2200L is built to withstand a 13 dBm input (1.0 Volt RMS) for any VSWR load condition. The internal switched mode power supply is very conservatively rated, to facilitate operation over a large range of line conditions and temperatures. The forced air cooling provides for low internal temperatures, providing long term reliability. The RF power is delivered by rugged DMoS FETs, de-rated to provide for excellent MTBF figures.
Features
- 200 Watts Linear RF Power
- 10 kHz – 12 MHz
- Instantaneous Bandwidth
- Solid State
- Air Cooled
Specifications
| Primary Performance Characteristics | |
| Start Frequency | 10 kHz |
| Stop Frequency | 12 MHz |
| Rated Power (P1dB) | 200 W |
| Saturated Power Output | 10 kHz to 12 MHz > 250 W
30 kHz to 10 MHz > 300 W |
| Power Gain | 53 dB nominal |
| Gain Flatness | ±1.5 dB |
| Input Power for Rated Output | 1 mW |
| Input Impedance / VSWR | 50 Ω / VSWR 1.5:1 Max |
| Output Impedance / VSWR | 50 Ω / VSWR 1.25:1 Max |
| Harmonic Level | < -25 dBc |
| Ruggedness | 00:1 VSWR |
| Stability | Unconditional into any passive load |
| Protection | Input: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) maximum and infinite load VSWR. |
| Front Panel Meter | Front panel indicates forward and reflected power. |
| Third Order Intercept Point | IP3 ~ 62 dBm |
| Class of Operation | Class A |
| Specifications | |
| AC Input | 104 to 240 VAC, 47-63 Hz
Current at rated power 8.4A at 120V 4.2A at 240V |
| Connectors | BNC |
| Operating Temperature | 0 to 40 ˚C |
| Cooling | Forced Air Cooling |
| Front Panel Display | Indicates forward and reflected power |
| Front Panel Accuracy | ±3% of full scale accuracy |
| Form Factor | |
| Weight | 45 lb. (20.5 kg) |
| Height | 5.3 in 134.5 mm |
| Width | 16.5 in 420.0 mm |
| Depth | 18.4 in 467.0 mm |
