E&I 601L RF Power Amplifier 800 kHz – 1000 MHz 1W
Description
E&I 601L RF Power Amplifier 800 kHz – 1000 MHz 1W is a rugged source of RF power suitable for a variety of UHF signal distribution and general laboratory applications. It is a compact fully solid-state design. It features low-level intermodulation distortion and inherent protection against short and open circuit loads. The 601L amplifies the inputs of AM, FM, SSB, pulse and other complex modulations within its output and bandwidth capability.
Flexible Operation
The 601L produces 1 Watt of Class A linear output power over a frequency range of 800 kHz to 1000 MHz with a nominal gain of 40 dB (±2.5dB). To provide exceptionally low levels of IMD, highly linear RF devices are used, with feedback, in the driver and output amplifier stages. All harmonics are more than 22 dB below the fundamental frequency at 1.0-Watt Pout.
Rugged Design
An integral power supply allows for operation directly from an input of 115/230 V single phase. Both the power supply and the forced air cooling are conservatively designed for operation over a wide temperature range.
Features
- 1-Watt UHF Amplifier
- 800 kHz – 1 GHz
- Class A Linearity
- Rugged Compact Design
- Operates into any Load
- Low Distortion
Specifications
| Primary Performance Characteristics | |
| Start Frequency | 800 kHz |
| Stop Frequency | 1000 MHz |
| Rated Power (P1dB) | 1 W |
| Power Gain | 40 dB |
| Gain Flatness | ±2.5 dB |
| Input Power for rated Pout | 0.1 mW (-10 dBm) |
| Input Impedance / VSWR | 50Ω / 2.5:1 maximum |
| Output Impedance / VSWR | 50Ω / 3.0:1 maximum |
| Harmonic Level | < -22 dBc at 1.0 W output |
| Ruggedness | 00:1 VSWR |
| Noise Figure | 10 dB typical |
| Spurious | < -60 dBc |
| Class of Operation | Class A |
| Specifications | |
| AC Input | 100 to 240 VAC, 47 to 63 Hz
Current at rated power 1A at 120V 0.5A at 240V |
| Connectors | BNC |
| Operating Temperature | 0 to 40 ºC |
| Cooling | Forced Air Cooling |
| Front Panel Display | Currently not available in this model |
| Protection | Input: Unit will withstand input signal of +13 dBm input signal for all load conditions |
| Form Factor | |
| Weight | 10 lb. 4.5 kg |
| Height | 3.5 in 88.9 mm |
| Width | 7.9 in 200.7 mm |
| Depth | 15.0 in 381.8 mm |
