EM TEST ACS 500N3 Single Phase AC Voltage Source 3 kVA
Description
EM TEST ACS 500N3 Single Phase AC Voltage Source 3 KVA is specifically designed for harmonics and flicker testing. It meets the corresponding specifications as per EN/IEC 61000-3-2 and EN/IEC 61000-3-3 as well as JIS C 61000-3-2.
As per standard requirements a pure voltage is needed for measurements of harmonics and flicker. The output voltage of the ACS 500N3 is guaranteed to be sinusoidal with a very low distortion (THD) of less than 0.1% regardless of the load. Furthermore, the voltage is kept stable within 0.1% independent of the load, even if the load is variable.
The ACS 500N3 AC voltage source is electronically protected against Overtemperature, Overcurrent, Overvoltage and Undervoltage.
Features
- Frequency (fund.) 10Hz .. 80Hz
- Very low distortion (THD)
- Very high voltage stability
- Output power 3,000VA
- Output voltage max. 300V
- High overcurrent capability
- Inrush current capability
- Remote controlled by the DPA 500N via RS232
Specifications
| OUTPUT | |
| Voltage range | 0V to 300V |
| Voltage resolution | 0.025% (12 bit) |
| Output frequency | 10Hz to 80Hz |
| Frequency resolution | 0.02Hz |
| Frequency accuracy, stability | 100ppm |
| Output power | 3,000VA |
| Output | Safety laboratory connector |
| Output current, 50Hz | Continuous: 12.1A maximum
RMS (max. 3s): 21.8A Repetitive peak: 80A |
| Output current, 60Hz | Continuous: 12.5A maximum
RMS (max. 3s): 22A Repetitive peak: 80A |
| INPUT | |
| Supply voltage | 230V (P,N,PE) |
| Input current | 25A |
| Line frequency | 45Hz – 65Hz |
| Fuse | 25A internal |
| Connector | Sockets |
| CONTROL | |
| Interface | RS 232, 9-pin SubD |
| DIMENSIONS | |
| Housing | 19″, 6HU |
| Weight | 23kg |
| Size | 287mm x 449mm x 500mm |
