EM TEST EFT 500N8-series Electrical Fast Transient Generator
Description
EM TEST EFT 500N8-series is state-of-the-art EFT/Burst testers with a built-in coupling/decoupling network for single phase or three-phase mains supply lines and a HV terminal to connect a capacitive coupling clamp. The spike frequency can be varied from as low as 100Hz to 1,000kHz.
The EFT 500N8-series is capable to generate 1,000 spikes per second or up to 150 spikes per burst. Its performance complies with IEC/EN 61000-4-4. Pre-programmed Standard Test routines and many selected User Test routines make the EFT 500N8-series an optimum standalone solution for both testing during development and final testing of products and sub-assemblies.
The EFT 500N8-series are fully compliant EFT/Burst testers. Its increased pulse voltage capability also meets requirements of some special product family standards and manufacturer requirements, especially household appliances.
MODEL OVERVIEW
EFT 500N8 EFT/Burst Generator with 1-phase coupler 250V/16A
EFT 500N8.1 EFT/Burst Generator with 3-phase coupler 3 x 440v/32A
Features
- Standalone Tester
- 7,000V Burst voltage
- Spike frequency 1MHz
- Built-in 1ph or 3ph coupler
- Standard Test routines
- USB and GPIB interfaces
01
02Specifications
| TEST LEVEL | |
| Voltage range | 1,000V – 7,000V |
| Into 50ohm | 500V – 3,500V |
| Pulse shape | 5/50ns into 50ohm load |
| Rise time tr | 5ns ± 30% |
| Pulse width td | 50ns ± 30% |
| Pulse shape | 5/50ns into 1,000ohm load |
| Rise time tr | 5ns ± 30% |
| Pulse width td | 35ns to 150ns |
| Source impedance | 50 Ohm ± 20% |
| Polarity | Positive/negative |
| OUTPUT | |
| Direct | Via HV coax connector |
| Coupler | L, N and PE, all combinations |
| DUT supply AC | 250V/16A, 50/60Hz |
| DUT supply DC | 250V/10A |
| DUT supply | Other DUT supply voltages on request |
| CRO Trigger | 15V trigger signal for oscilloscope; burst duration and pulse frequency can be checked |
| INTERFACES | |
| Optical Interface | Opto link, 3 m cable
USB A connector |
| Parallel interface | IEEE 488, address 1 – 30 |
| CN interface | To control external CNI 503 |
| GENRAL DATA | |
| Dimensions, Weight | EFT 500N8:
19*/3HU, Approx. 15kg EFT 500N8.1: 19*6HU, Approx. 19kg |
| Supply voltage | 115/230V, +10/-15% |
| Fuses | 2x t 2AT (230V);
2x T 4AT (115V) |
