EM TEST UCS 500N5P Power Fail Simulator
Description
UCS 500N5P Power Fail Simulator for Dips and Short Interruptions as per IEC/EN 61000-4-11 and 61000-4-29
EM TEST UCS 500N5P Power Fail Simulator is a fully compliant simulator as per IEC 61000-4-11 and IEC 61000-4-29 with the best benefit-to-cost ratio yet upgradeable to include other test abilities such as EFT/Burst and Combination Wave Surge.
The UCS 500N5P includes everything necessary to conduct fully compliant tests. The power mains supply for the controls and for the DUT is separate to render it more flexible to use with different DUT supply voltages.
Pre-programmed Standard Test routines allow users to change parameters on-line during their test to evaluate the susceptibility level of an individual DUT.
MODEL OVERVIEW
UCS 500N5 Transient Generator for EFT/Burst, Surge & Power Fail up to 5.5 kV as per IEC/EN 61000-4-4, 61000-4-5 and 61000-4-11
UCS 500N5E Electrical Fast Transient /Burst Generator up to 5.5 kV as per IEC/EN 61000-4-4
UCS 500N5V Combination Wave (Surge only) Generator up to 5kV as per IEC/EN 61000-4-5
Features
- Fully compliant to IEC 61000-4-11 Ed.2 as well as IEC 61000-4-29
- Voltage/current up to 300V/32A AC/DC
- Switching time between 1us and 5us
- Inrush current > 500A
- Monitor outputs for voltage and current
- Fail inputs
- External variac control 0-10Vdc
- Magnetic field tests with optional accessories
- Manual operation from front panel
- USB and GPIB-Bus for remote control
01
02Specifications
| TECHNICAL DETAILS | |
| As per EN/IEC 61000-4-11, IEC/EN 61000-4-29 and EN 61000-6-1, -6-2 | |
| Channel PF1/PF2 | AC voltage: max. 300V
AC current: max. 32A DC voltage: max. 300V DC current: max. 32A |
| Frequency | AC: 16Hz – 500Hz and DC |
| Switching time | 1us to 5us into a 100ohm resistive load |
| Inrush current | > 500A |
| Protection | Both channels are protected against short-circuit conditions. |
| OUTPUTS | |
| DUT terminals | L,N and PE |
| CRO trigger | 5V trigger signal oscilloscope |
| INTERFACES | |
| Serial interface | USB |
| Parallel interface | IEEE 488, addresses 1 – 30 |
| Analog output | 0 – 10VDC to control an external transformer |
| Fail inputs | DUT monitoring via Fail1 and Fail2 input (one each) |
| GENERAL DATA | |
| Dimensions | 19″, 3HU |
| Weight | approx. 15kg |
| MAINS | |
| Supply voltage | 115V/230VAC +10%/-15% |
| Power | approx. 75W |
| Frequency | 50/60Hz |
| Fuses | 2xT2AT (230V) or 2xT4AT (115V) |
