EM TEST UCS 500N5V Combination Wave Generator
Description
UCS 500N5V Combination Wave (Surge only) Generator up to 5kV as per IEC/EN 61000-4-5
EM TEST UCS 500N5V Combination Wave Generator is designed as a Surge generator only. It is a full performing Surge tester as per IEC/EN 61000-4-5 with the best benefit-to-cost ratio yet upgradeable to include other test abilities such as EFT/Burst and PowerFail. The UCS 500N5V has a built-in single-phase coupler 300V/16A AC/DC extendable for testing three-phase DUTs by means of automatically controlled external coupling networks up to 100A. The UCS 500N5V offers an extended test voltage/current range up to 5kV/2.5kA for testing beyond basic requirements for development testing as well as fully-compliant standard tests as per IEC/EN 61000-4-5.
MODEL OVERVIEW
UCS 500N5 Transient Generator for EFT/Burst, Surge & Power Fail up to 5.5 kV per IEC/EN 61000-4-4, 61000-4-5 and 61000-4-11
UCS 500N5E Electrical Fast Transient /Burst Generator up to 5.5 kV as per IEC/EN 61000-4-4
UCS 500N5P Power Fail Simulator for Dips & Short Interruptions as per IEC/EN 61000-4-11 and 61000-4-29
Features
- Fully compliant to IEC 61000-4-5
- Surge voltage up to 5kV
- Surge current up to 2.5kA
- Built-in single phase coupler 300V/16A
- Programmable current limiters
- Monitor outputs for peak voltage and peak current
- Standard and user test routines
- Manual operation from front panel
- USB and GPIB-Bus for remote control
- Fail inputs
- Control of external three-phase couplers
- Pulse magnetic field tests with optional accessories
01
02Specifications
| As per EN/IEC 61000-4-5 and EN 61000-6-1, -6-2 | |
| Voltage (o.c.) | 160V – 5,000V ± 10% |
| Pulse front time | 1.2us ± 30% |
| Pulse time to half value | 50us ± 20% |
| Current (s.c.) | Max. 2,500A ± 10% |
| Pulse front time | 8us ± 20% |
| Pulse time to half value | 20us ± 20% |
| Polarity | Positive/negative/alternating |
| Event counter | 1 – 30,000 or endless, selectable |
| OUTPUTS | |
| Direct | Via HV connectors for external coupling networks (Zi = 2ohm with optional adapter IMN 2) |
| Coupling mode | Line to line
Line(s) to ground |
| DUT supply | AC: 300V/16A; 50/60Hz
DC: 300V/16A |
| CRO trigger | 5V trigger signal for oscilloscope |
| Interfaces | |
| Serial interface | USB |
| Parallel interface | IEEE 488, addresses 1 – 30 |
| CN interface | 15pin SubD connector to control an external coupling network |
| Fail inputs | DUT monitoring via Fail1 and Fail2 input (one each) |
| MAINS | |
| Supply voltage | 115V/230VAC +10%/-15% |
| Power | approx. 75W |
| Frequency | 50/60Hz |
| Fuses | 2 x T 2AT (230V) or 2 x T 4AT (115V) |
