EM TEST VSS 500N10 Voltage Surge Generator
Description
VSS 500N10 – 10kV Voltage Surge Generator for safety testing
EM TEST VSS 500N10 Voltage Surge Generator is designed to meet the surge test requirements for safety tests on audio, video and similar apparatus. The standards specify the components for the pulse generation. A special switch is used in the VSS 500N10, designed to avoid any energy to dissipate in arcing or inadequate insulation.
The voltage surge simulator VSS 500N10 generates high voltage transients as required by IEC/EN 60065 and UL 6500 standards for safety tests. Such tests are also required by IEC/EN 60950-1 for safety testing of Information Technology equipment.
Features
- Surge voltage up to 10kV
- Generator designed to comply with IEC 60065
- Generator designed to comply with UL 6500
- Interlock
- Warning lamp control
- Manual operation
- USB (optical link) and GPIB interface
01
02 Download Data Sheet
Print
Email
Specifications
| TECHNICAL DETAILS | |
| VOLTAGE SURGE SIMULATOR, PULSE AS PER IEC 60065 | |
| Voltage (o.c.) | 500V – 10,000V ± 10% |
| Surge capacitor | 1nF |
| Series resistor | 1,000ohm |
| Parallel resistor | >15Mohm |
| Polarity | Positive |
| Event counter | 1 – 30,000 or endless |
| TRIGGER | |
| Automatic | Automatic pulse release |
| Manual | Single pulse release |
| External | External pulse release |
| CRO trigger | 5V trigger signal for oscilloscope |
| Pulse repetition rate | Max. 1Hz (1s – 999s) |
| OUTPUT | |
| Direct | Via HV connector; Zi = 1,000ohm |
| INTERFACE | |
| Serial interface | Opto link, 3m cable
USB A connector |
| Parallel interface | IEEE 488, addresses 1 – 30 |
| GENERAL DATA | |
| Dimensions | 19″/3HU |
| Weight | approx. 12kg |
| Supply voltage | 115/230V +10/-15% |
| Fuses | 2 x 2AT (230V) or 2 x 4AT (115V) |
