EM TEST VSS 500N12.7 Voltage Surge Simulator
Description
VSS 500N12.7 Voltage Surge Simulator for Isolation (voltage withstand) testing up to 12 kV as per IEC 60950-1
EM TEST VSS 500N12.7 Voltage Surge Simulator generates high voltage transients as required for Information technology equipment by the IEC 60950-1, IEC 60065 and ITU-T K.44 standards. The voltage surge pulses are used to test the isolation (voltage withstand) capability of components, sockets, connectors, cables and many other items.
Spark over detection and voltage/current measuring functions are included in the generator.
Testing the voltage withstand capability by means of a transient test pulse is the most common alternative to tests using A.C. or D.C. voltages.
MODEL SERIES OVERVIEW
VSS 500N12-series 12 kV Pulse generator for voltage withstand testing per IEC standards
Features
- Surge voltage up to 12 kV
- ITU-T test generator N.1, Wave form 1.2/50 us
- Built-in source impedance 13 ohm +25 ohm
- USB (optical link) and GPIB interface
- Interlock
- Voltage/current measurement
- Warning lamp control
- Manual operation
- Spark-over detection
01
02Specifications
| TECHNICAL SPECIFICATIONS | |
| VOLTAGE SURGE SIMULATOR, PULSE 1.2/50µs | |
| Voltage (o.c.) | 500V – 12,000V ± 10% |
| Pulse front time | 1.2µs ± 30% |
| Pulse time to half | 50µs ± 20% |
| Current (s.c.) | Max. 315A ± 10% |
| Int. components | C1: 1 uF
C2: 30 nF R1: 76 ohm R2: 13 ohm R3: 25 ohm |
| Polarity | Positive/negative/alternating |
| Event counter | 1 – 30,000 or endless |
| TRIGGER | |
| Automatic | Automatic pulse release |
| Manual | Single pulse release |
| External | External pulse release |
| CRO trigger | 5V trigger signal for oscilloscope |
| Synchronization | 0° – 360°, resolution 1° |
| Repetition rate | Max. 1Hz (1s – 999s) |
| OUTPUT | |
| Direct | Via HV connector; Zi = 38 ohm as defined in IEC 60065 (13 ohm + 25 ohm) |
| INTERFACE | |
| Optical interface | Opto link, 3m cable
USB A connector |
| Parallel interface | IEEE 488, addresses 1 – 30 |
| GENERAL DATA | |
| Dimensions | 19″/3HU |
| Weight | approx. 15.5kg |
| Supply voltage | 115/230V +10/-15% |
| Fuses | 2 x 2 AT (230V) or 2 x 4 AT (115V) |
