ETS-Lindgren HI-6005 Electric Field Probe 100 kHz – 6 GHz
Description
The battery-powered HI-6005 Electric Field Probe embodies the latest innovations in isotropic sensor design and low noise, miniaturized electronics. Designed to be single range reading, the HI-6005 can read data continuously over the entire dynamic range. Data values for each axis (X, Y, and Z) can be read individually or summed.
The HI-6005 Electric Field Probe is a fully intelligent sensor enabling fast and accurate EMF measurements with industry-leading performance specifications. Optical coupling to a variety of readout options makes this probe ideally suited for a wide range of field monitoring applications.
The HI-6100 Field Monitor provides manual functions and programmed control via IEEE-488 and RS-232 Serial Data Interfaces. Readings from up to four probes can be displayed simultaneously.
For direct connection to a PC either the HI-4413P Serial or the HI-4413USB interfaces are available.
Features
- Frequency Response: 100 kHz – 6 GHz
- Dynamic Range: 0.5 – 800 V/m
- Provides Individual and Summed Axis Values
- A2LA Accredited Calibration Report
- Suitable for MIL Standard Specs:
— MIL-STD 461F Radiated Susceptibility (RS) - Suitable for Automotive Specs:
— SAE J1113/27
— GM9120P
— GM93100GS
— GM9114P - Suitable for Commercial Specs:
— EN/IEC61000-4-3 Radiated Immunity - Operates with most 3rd Party Immunity software
Specifications
| Electrical Specifications | |
| Detection | Isotropic (X, Y and Z Axis Readings) |
| Frequency Range | 100 kHz to 6 GHz |
| Frequency Response | 500 kHz to 2 GHz +1.0, -2.5 dB 2 to 5.5 GHz +3.5, -4.0 dB 5.5 to 6 GHz +2.0, -6.0 dB |
| Frequency Response with Correction | 100 kHz to 6 GHz ± 0.9 dB |
| Dynamic Range | 0.5 – 800 V/m (Single Range) |
| Resolution | 0.01 V/m |
| Isotropic Deviation | ± 0.5 dB @ 400 MHz |
| Linearity | ± 0.5 dB @ 27 MHz |
| Sample Rate (Typical) | 70 Samples/second maximum |
| Overload Withstand | >1500 V/m CW |
| Physical Specifications | |
| Physical Interface | Duplex Optical Fiber (200 micron multimode) FSMA Connectors. Integral 1m optical cable |
| Operating Temperature Range | 10º to 40°C 5-95% Relative Humidity Non-condensing |
| Battery | Rechargeable NiMH |
| Battery Life | Up to 8 Hours |
| Battery Charger | 100-240 VAC Universal Input 3-Hour Charge from Full Depletion |
| Cubical Housing Length | 32 mm (1.26 inches) |
| Cubical Housing Width | 32 mm (1.26 inches) |
| Cubical Housing Height | 32 mm (1.26 inches) |
| Sensor Protection Caps Height | 43 mm (1.69 inches) |
| Weight | 80 g ( 2.82 ounces ) |
| Mounting | 1/4 – 20 UNC Internal Thread |
