ETS-Lindgren HI-6105 Electric Field Probe 100 kHz – 6 GHz
Description
The laser-powered HI-6105 Electric Field Probe embodies the latest innovations in isotropic sensor design and low noise, miniaturized electronics. Designed to be single range reading, the HI-6105 can read data continuously over the entire dynamic range. Data values for each axis (X, Y, and Z) can be read individually or summed.
Fiber optic signal and power lines link the Model HI-6105 probe to either the model HI-6100 Field Monitor or as a direct connect to a PC with the HI-6113 Laser Data Interface and ProbeView Laser Software.
The HI-6100 Field Monitor provides manual functions and programmed control via IEEE-488 and RS-232 Serial Data Interfaces. Readings from up to four probes can be displayed simultaneously.
The HI-6113 Laser Data Interface provides the laser power and communications for the HI-6105 Electric Field Probe. A USB connection to the PC allows for quick and easy data collection, using ProbeView Laser software.
Features
- Laser Powered – permits extended testing
- Frequency Response: 100 kHz – 6 GHz
- Dynamic Range 0.5 to 800 V/m (Single Range)
- Provides Individual and Summed Axis Values
- A2LA Accredited Calibration Report
- Suitable for MIL Standard Specs:
— MIL-STD 461F Radiated Susceptibility (RS) - Suitable for Automotive Specs:
— SAE J1113/27
— GM9120P
— GM93100GS
— GM9114P - Suitable for Commercial Specs: EN/IEC 61000-4-3 Radiated Immunities
- Operates with most 3rd Party Immunity software
Specifications
| Electrical Specifications | |
| Detection | Isotropic (X, Y and Z Axis Readings) |
| Frequency Range | 100 kHz to 6 GHz |
| Frequency Response | 500 kHz to 2 GHz +1.0, -2.5 dB 2 to 5.5 GHz +3.5, -4.0 dB 5.5 to 6 GHz +2.0, -6.0 dB |
| Frequency Response with Correction | 100 kHz to 6 GHz ± 0.9 dB |
| Dynamic Range | 0.5 – 800 V/m (Single Range) |
| Resolution | 0.01 V/m |
| Isotropic Deviation | ± 0.5 dB @ 400 MHz |
| Linearity | ± 0.5 dB @ 27 MHz |
| Sample Rate (Typical) | 70 samples/second maximum >1500 V/m CW |
| Overload Withstand | >1500 V/m CW |
| Physical Specifications | |
| Physical Interface | Duplex Optical Fiber (62.5 micron multimode) FC Connectors for laser cable, integral 1m optical cable ST Connector for transmitter cable, Integral 1m optical cable |
| Operating Range | 10 to 40°C , 5-95% Relative Humidity Non-condensing |
| Cubical Housing Length | 32 mm (1.26 inches) |
| Cubical Housing Width | 32 mm (1.26 inches) |
| Cubical Housing Height | 32 mm (1.26 inches) |
| Sensor Protection Caps Height | 43 mm (1.69 inches) |
| Weight | 80 g ( 2.82 ounces ) |
| Mounting | 1/4 – 20 UNC Internal Thread |
