Haefely Hipotronics PCD 122 Coupling Network for Symmetrical Data and Control Lines
Description
Haefely Hipotronics PCD 122 Coupling Network for Symmetrical Data and Control Lines is used for coupling of 10/700us impulses up to 6.6kV peak onto unshielded symmetrical data and signal lines according IEC/EN and ITU standards. Up to 2 pairs / 4 wires can be tested simultaneously.
To obtain maximum flexibility only coupling elements are included in the PCD 122. Decoupling circuits, which depends on the EUT to be tested, can be placed separately in the test setup. Manual coupling path switching for common mode (longitudinal, line to earth) and for differential mode (transverse mode, line to line) testing. The coupling elements can be selected easily.
Features
- 10/700us impulses
- Serial resistors included
- Up to 4 wires can be tested
- Signal Bandwidth up to greater than 10MHz
- Low capacitive load on the EUT lines
- Manual coupling path selection
01
02 Download Data Sheet
Print
Email
Specifications
| Impulse shape | 10/700ms – 5/320us |
| Impulse amplitude | Max. 6.6kV |
| Serial Resistor | |
| 4 x 25 Ohm | 1 wire (IEC/EN) or 4 wires / 2 pairs (ITU) |
| 4 x 50 Ohm | 2 wires / 1 pair (IEC/EN) |
| 4 x 100 Ohm | 4 wires / 2 pairs (IEC/EN) |
| Coupling elements | Gas arrestors 90V
Avalanche breakdown diodes (ABDs) |
| Voltage on EUT lines | |
| Max. 72VDC or 50VAC, RMS | with gas arrestors as coupling elements |
| Max. 144VDC or 100VAC, RMS | with ABDs as coupling elements |
| Signal bandwidth | |
| up to >10MHz | with gas arrestors as coupling elements |
| up to >1MHz | with ABDs as coupling elements |
| Dimensions (w x h x d) | 45 x 19.5 x 57 cm |
| Weight | approx. 10 kg net |
