Haefely Hipotronics PIM 110 Ring Wave Impulse Module
Description
Haefely Hipotronics PIM 110 Ring Wave Impulse Module is designed to meet the requirements as per IEC 61000-4-12 and ANSI C62.41 for application on power lines in a protected environment.
The PIM 110 is part of the PSURGE 8000 Surge Platform System that be used together with strong Coupling/Decoupling Networks (CDNs) for superimposition of the impulse on AC and DC power lines. Single and three phase CDNs have multiplexed inputs, allowing up to 3 impulse modules to be connected. A full suite of test impulses can then be performed completely automatically and without the need to power down and reconnect the EUT.
MODEL OVERVIEW
PSURGE 8000 Modular Expandable Surge Platform Test System
Features
- Floating high voltage output
- Ring wave 5us – 100kHz (voltage and current)
- 8kV impulse voltage
- 12W, 30W and 200W source impedance
- Impulse voltage and current monitors
- Accurate phase angle synchronization
Download Data Sheet
Print
Email
Specifications
| Impulse Voltage | 0.20 – 7.8kV ±10% |
| Source Impedance | 12, 30 & 200 Ohms |
| Impulse Polarity | Positive and Negative |
| Repetition @ Umax | 5 seconds / 12 per minute |
| Line Synchronization | 1° steps ±1° @50Hz |
| Impulse rise time | V= 0.5us ±20% & I= < 1.0us |
| Impulse frequency | 100kHz ± 10% ( V & I) |
| Voltage Monitor | BNC, (750/1) |
| Current Monitor | BNC, (12 & 30W 80A/V) 200Ω 5A/V |
| Impulse Output | HV connector with safety circuit |
| Dimensions (W x H x D) | 45 x 17 x 57 cm |
| Weight | 44 lbs (29 kg) |
