Agilent 54624A 4 Channel 100 MHz Oscilloscope
Description
The Agilent 54624A 100 MHz Oscilloscope will give you the channel count and measurement power you need, including MegaZoom deep memory, high definition display and flexible triggering, especially if your designs include heavy analog content. Whether you're testing designs with four inputs, such as anti-lock brakes, or monitoring multiple outputs of a power supply, the four-channel model helps you get your debug and verification done with ease.
Features
- Enhanced serial triggering capabilities and integrated 5-digit frequency counter measurement.
- Lower cost deep memory 4-channel scope on the market
- Unique 4-channel model
- 100 MHz, 200 MSa/s
- 2 MB of MegaZoom deep memory per channel
- Patented high-definition display
- Flexible triggering including I²C, SPI, CAN and USB
Specifications
|
Acquisition: Analog Channels |
|
|
Max Sample Rate |
200 MSa/s |
|
Max Memory Depth |
4 MB interleaved, |
|
Vertical Resolution |
8 bits |
|
Peak Detection |
5 ns |
|
Averaging |
Selectable from 2, 4, 8, 16, 32, 64 … to 16383 |
|
High Resolution Mode |
12 bits of resolution when ≥500 μs/div, (average mode with ave = 1) |
|
Filter |
Sinx/x interpolation (single shot BW = sample rate/4 or bandwidth of scope, whichever is less) with vectors on |
|
Vertical System: Analog Channels |
|
|
Analog Channels |
Ch 1, 2, 3 and 4 simultaneous acquisition |
|
Bandwidth (-3dB) |
dc to 500 MHz |
|
ac Coupled |
3.5 Hz to 500 MHz |
|
Calculated Risetime |
~700 ps |
|
Single Shot Bandwidth |
500 MHz maximum |
|
Range1,2 |
1 mV/div to 5 V/div |
|
Maximum Input |
CAT I 300 Vrms, 400 Vpk, CAT II 100 Vrms, 400 Vpk |
|
Offset Range |
±5 V on ranges <10 mV/div; ±25 V on ranges 10 mV/div to 199 mV/div;±100 V on ranges ≥200 mV/div |
|
Dynamic Range |
Lesser of ±8 div or ±32 V from center screen |
|
Input Resistance |
1 MΩ ±1%, 50 Ω selectable |
|
Input Capacitance |
~ 14 pF |
|
Coupling |
ac, dc, ground |
|
>BW Limit |
~ 20 MHz selectable |
|
Channel-to-Channel Isolation |
dc to 20 MHz > 40 dB; 20 MHz to max bandwidth > 30 dB |
|
ESD Tolerance |
±2 kV |
|
Noise Peak-to-Peak |
2% full scale or 1 mV, whichever is greater |
|
Common Mode Rejection Ratio |
20 dB @ 50 MHz |
|
DC Vertical Gain Accuracy*1,2 |
±2.0% full scale |
|
DC Vertical Offset Accuracy |
<200 mV/div: ±0.1 div ±1.0 mV ±0.5% offset value; ≥200 mV/div: ±0.1 div ±1.0 mV ±1.5% offset value |
|
Single Cursor Accuracy1,2 |
±{DC Vertical Gain Accuracy + DC Vertical Offset Accuracy + 0.2% full scale (~1/2 LSB) } |
|
Dual Cursor Accuracy*1,2 |
±{DC Vertical Gain Accuracy + 0.4% full scale (~1 LSB)} |
|
Horizontal |
|
|
Range |
5 ns/div to 50 s/div |
|
Resolution |
25 ps |
|
Vernier |
1-2-5 increments when off, ~25 minor increments between major settings when on |
|
Delay Range |
Pre-trigger (negative delay): Greater of 1 screen width or 10 ms |
