Keysight E5100A Network Analyzer 10 kHz - 300 MHz
Description
Keysight E5100A network analyzer is most appropriately employed on production lines of electronic component manufacturers. They are especially well suited for crystal and ceramic resonator or filter manufacturers. These analyzers improve production line productivity with fast measurement speed, fast waveform analysis commands, and a high- speed processor. They provide faster measurements with lower fluctuations because of their low- noise performance and fine resolution IFBW.
The E5100A (10 kHz to 180/300MHz) is a versatile and affordable network analyzer with many functions and options to fit your particular needs with a minimal investment. You can choose the 300 MHz version or the low-priced 180 MHz version.
Features
- High speed filter and resonator evaluation using waveform analysis commands
- IBASIC for easy automation
- Phase tracking function for high speed evaluation of resonator (Option)
- Evaporation monitoring function (Option)
Specifications
|
Frequency range |
10 kHz – 180 MHz/300 MHz |
|
Power (One RF OUT) |
–48 dBm to +22 dBm (option), |
|
–9 dBm to +11 dBm (standard) |
|
|
Measurement parameters |
Gain (Amplitude Ratio), Phase, Group-Delay, Amplitude, Gain- Phase, Gain-Delay |
|
IFBW |
10 Hz – 30 kHz (1, 1.5, 2, 3, 4, 5, 8steps) |
|
Dynamic range |
120 dB (1FBW = 1 kHz) |
|
Dynamic accuracy |
±0.05 dB, ±0.3 degrees |
|
Measurement speed |
0.04 ms/point (IFBW = 30 kHz, Ramp-sweep) |
|
Display |
6.5-inch (diag.) color LCD |
|
Programming |
Instrument BASIC |
|
Mass storage |
FDD and internal non-volatile memory |
