Solar 2352-1 Audio Power Amplifier 200 Watt
Description
For Conducted Audio Frequency Susceptibility Testing.
The Solar Model 2352-1 Audio Power Amplifier has a wide band frequency response and is capable of providing up to 200 watts at 1000 Hz into 2.0 ohms. Requires approximately 0.5 volts signal input for maximum power output at 1000 Hz. Designed for laboratory use with conventional 3/4″ binding posts. A panel mounted fuse and an overload trip indicator protect the instrument from excessive out current or overvoltage conditions encountered in some applications.
Features
- Digital volt meter; monitors the output voltage level
- Wide frequency range; 30 Hz to 150 kHz (200 watts into 2.0 Ω [non-inductive])
- Low Output Impedance for greater transfer of audio power
- Protective circuits prevent damage to output stage caused by power frequency feedback in typical a.c. test setups
- Up to 200 watts output into 2.0 ohm resistive load
Solar 2352-1 Application
The Solar Model 2352-1 200 watt Solid State Audio Power Amplifier was specifically designed for use with the Type 6220-1A Audio Isolation Transformer in making audio frequency susceptibility tests as required by Mil-Std-461E/F CS101. It also can be used for other EMI specifications.
Specifications
|
Frequency Range |
20 Hz to 150 KHz |
|
Frequency Stability |
250 ppm/C |
|
Input Voltage |
0.5 volt for maximum power at 1000 Hz |
|
Input Impedance |
600 Ω (For 50 Ω, place a 550 Ω resistor in series with the input) |
|
Output Power |
200 watt into 2.0 Ω non-inductive |
|
Output Impedance |
2.0 Ω |
|
Output Voltage |
>20 volts RMS into 2.0 Ω non-inductive |
|
Power Source |
115/230 V 60/50 Hz |
|
Power Line Fuses 115 V |
12 amperes (2) |
|
Power Line Fuses 230 V |
5 amperes (2) |
|
Net Weight |
39 Lbs (17.7. Kg) |
|
Shipping Weight |
45 Lbs (20.4. Kg) |
|
Height |
9.12 Inches (22.2 cm) |
|
Width |
17.12 Inches (43.5 cm) |
|
Depth |
13.50 Inches (34.3 cm) |
