LeCroy 9354AL 4 Channel 500 MHz Digital Oscilloscope 2 GSa/s
Description
The LeCroy 9354AL oscilloscope is a graph-displaying device it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.
The LeCroy 9354AL oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the moving parts of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
Features
- 500 MHz Bandwidth
- 4 Channels
- Sample rates up to 2 GSa/s
Specifications
|
Bandwidth |
500 MHz |
|
Number of Channels |
4 ch |
|
Simultaneous Channels |
4 ch |
|
Simultaneous Maximum Sampling Rate/ch |
500 MSa/s |
|
One ch. only max. sampling rate |
2 GSa/s |
|
Max. Record Length |
16000 pt/sec |
|
Min. Vertical Sensitivity |
2 mV/div |
|
Maximum Vertical Sensitivity |
5 V/div |
|
Number of Bits |
8 bits |
|
Input Impedance |
1 MOhm |
|
Input Impedance (alternate) |
50 Ohm |
|
Input Coupling |
AC,DC,GND |
|
Maximum Input Voltage |
1 Vrms |
|
Maximum Input#2 (for Impedance #2) |
5 Vrms |
|
Main time base – lowest |
1 ns/div |
|
Main time base – highest |
1000 s/div |
|
Timebase accuracy |
.001 % |
|
Trigger Source |
External,Internal |
|
Trigger Modes |
Auto,Edge,Normal,Pattern,Single,State,Width |
|
Minimum Trigger Holdoff |
10 ns |
|
Minimum Glitch Trigger |
1 ns |
|
Display Type |
CRT Monochrome |
|
Display Size |
22.86 cm |
|
Display modes |
Normal,Persistence,Variable,X/Y |
